講演抄録/キーワード |
講演名 |
2021-02-12 13:35
高信頼性トリガギャップスイッチにより大気中で発生する12路並列放電アークの写真観察 ○相沢友勝(都立高専) R2020-34 EMD2020-25 エレソ技報アーカイブへのリンク:EMD2020-25 |
抄録 |
(和) |
このトリガギャップスイッチには,主電極と誘導電界発生用コイルが複数組み合わされたスイッチング回路がある.この回路は大気中で別のトリガ用放電回路と電磁結合している.トリガ回路を放電するとこの回路に磁束が交差し,誘導電界が発生する.この結果,ギャップスイッチの各主電極間に電圧が発生し,並列12路アーク放電が生じる.充電されたコンデンサ電源からこのスイッチング回路を経て流れる放電電流は,この回路のインダクタンスを打ち消すように流れる.スイッチング回路のコイルは,4ターン巻かれ,すぐ外側に置かれたトリガ用放電回路と電磁結合する.スイッチング回路およびトリガ用放電回路は,各主電極間に加わるコンデンサ充電電圧がなくても,全電極間が放電するよう選ばれる.12路アーク全体写真(静止画像)は露出時間約1秒で撮られる. |
(英) |
This trigger gap switch has a switching circuit that combines multiple main electrodes and induced electric field generating coils. This circuit is electromagnetically coupled to another trigger discharge circuit in the atmosphere. When the trigger circuit is discharged, the magnetic flux intersects the switching circuit and an induced electric field is generated. The resulting voltage is generated between each main electrode of the gap switch, and 12-discharge arcs occur. The discharge current flowing from the charged capacitor bank through this switch flows so as to cancel the inductance of the switching circuit. The coils of the switching circuit are wound for 4 turns and are electromagnetically coupled to the trigger discharge circuit placed just outside. The switching circuit and the trigger discharge circuit are selected so that all main electrodes are discharged even when there is no capacitor charging voltage between each main electrode. The entire 12-arcs photo (still image) is taken with an exposure time of approximately 1 second. |
キーワード |
(和) |
放電ギャップスイッチ / 高信頼性トリガ放電 / 誘導電界 / 並列12路アーク放電 / アーク観察 / / / |
(英) |
Spark gap switch / Reliable trigger discharge / Induced electric field / Parallel 12-arc discharge / Arc observation / / / |
文献情報 |
信学技報, vol. 120, no. 361, EMD2020-25, pp. 1-6, 2021年2月. |
資料番号 |
EMD2020-25 |
発行日 |
2021-02-05 (R, EMD) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
R2020-34 EMD2020-25 エレソ技報アーカイブへのリンク:EMD2020-25 |