講演抄録/キーワード |
講演名 |
2020-11-19 11:15
GNU Radioを用いたUSRPおよびドータボードでの位相同期の実装例 ○中浜智也・山田洋士(石川高専)・亀田 卓(東北大) SR2020-34 |
抄録 |
(和) |
Ettus Research社のUSRP Hardware Driver and USRP Manualに基づき,GNU Radio上でUHD(USRP Hardware Driver)の機能を利用して複数台のUSRPおよびドータボード間での動作タイミングの同期と位相同期を行うPythonコードの実装例を紹介する.本実装例は,USRP N200シリーズおよびX300シリーズをSBXまたはBasic TX/RXドータボードと組み合わせて使用する場合を対象としている.(a)1台のUSRPで送信・受信を同時に実行する場合,(b)2台のUSRPで位相の揃った同時受信を行う場合,(c)2台のUSRPで送信・受信を同時に実行する場合について,サンプルコードを示す.GNU Radio Companion(GRC)で付与されないUHDのプロパティ値をUHD Timed Commandsと呼ばれる機構により指定することで目的を達成することから,GRCで生成されたPythonコードに10~20行程度のPythonコードを追記する形態での実装例となっている.紹介する実装例は,同期が必要となる実験をUSRPを用いて初めて実施されたい学習者/技術者/研究者にとって,シンプルかつ有用なサンプルになり得ると考えている.UHD Timed Commands拡張を含めたGRC用の独自の処理ブロックを作成する試みについても紹介する. |
(英) |
This summary describes example GNU Radio implementations of Python code that uses the USRP Hardware Driver (UHD) to achieve time alignment and phase synchronization between multiple USRPs and daughter boards based on the USRP Hardware Driver and USRP Manual of the Ettus Research. The implementation examples are intended for use with the USRP N200 and X300 series in combination with the SBX or Basic TX/RX daughter board. Sample codes for (a) simultaneous transmit and receive with one USRP, (b) simultaneous phase-aligned receive with two USRPs, and (c) simultaneous transmit and receive with two USRPs are shown as typical examples. This method achieves its goal by specifying the UHD property values, which are not assigned by the GNU Radio Companion (GRC), by using of the UHD Timed Commands. An own processing block for the GRC is developed. It enables the UHD Timed Commands extension on the GRC. |
キーワード |
(和) |
ソフトウェア無線 / タイムアライメント / コヒーレント受信 / LO同期 / UHD Timed Commands / Python / / |
(英) |
software defined radio / time alignment / coherent receiver / LO-synchronization / UHD Timed Commands / Python / / |
文献情報 |
信学技報, vol. 120, no. 238, SR2020-34, pp. 74-81, 2020年11月. |
資料番号 |
SR2020-34 |
発行日 |
2020-11-11 (SR) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
SR2020-34 |
|