講演抄録/キーワード |
講演名 |
2020-01-17 14:30
二硫化モリブデンショット処理による銅接点の摺動特性 ○飯塚達郎・川島優樹・緒方 翔・渡辺克忠・上野貴博・澤 孝一郎(日本工大) EMD2019-49 エレソ技報アーカイブへのリンク:EMD2019-49 |
抄録 |
(和) |
電気摺動接触機構は,静止物体から移動物体へ通電を行う機構であり,電気鉄道のパンタグラフとトロリー線,電動機におけるブラシ/スリップリングなど様々な分野で使用されている.これらは,材料同士をすり接触しているため,常に摩擦の問題が発生する.材料の摩擦によって,潤滑性が悪くなると,通電が正常に行われなくなる.本研究では,すり接触を正常に行い,安定した接触電気抵抗を保つことを目的として,摺動部に二硫化モリブデンを添加した摺動実験を行った.結果として,潤滑性に効果を発揮し,実用の可能性を示したので報告する. |
(英) |
The electric sliding contact mechanism is a mechanism for energizing a moving object from a stationary object.
It is used in various fields such as electric railway pantographs and trolley wires, and brush / slip rings in electric motors. Since these materials are in contact with each other, friction problems always occur. If the lubricity is deteriorated due to the friction of the material, the current cannot be normally supplied. In this study, a sliding experiment was performed in which molybdenum disulfide was added to the sliding part for the purpose of normal sliding contact and maintaining stable contact electrical resistance. As a result, it demonstrated the effect on lubricity and showed the possibility of practical use. |
キーワード |
(和) |
二硫化モリブデン / 摩擦係数 / 接触電気抵抗 / / / / / |
(英) |
Molybdenum disulfide / Coefficient of friction / Contact electrical resistance / / / / / |
文献情報 |
信学技報, vol. 119, no. 370, EMD2019-49, pp. 7-10, 2020年1月. |
資料番号 |
EMD2019-49 |
発行日 |
2020-01-10 (EMD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMD2019-49 エレソ技報アーカイブへのリンク:EMD2019-49 |