講演抄録/キーワード |
講演名 |
2019-07-18 10:30
等価アンテナを用いた金属板上に配置したワイヤーハーネスからの放射電界の推定 ○山田紘生・王 建青(名工大) EMCJ2019-19 |
抄録 |
(和) |
近年,自動車に搭載される電子機器の増加に伴い,それに接続されるワイヤーハーネスも増加している.ワイヤーハーネスに流れるコモンモード電流から発生する電磁放射ノイズは,車載電子機器の誤作動を引き起こす原因となることから,ワイヤーハーネスからの放射電界の事前予測はEMC設計の立場から求められている.本研究では,等価アンテナの考え方を適用することにより,電子機器が接続された金属板上に配置されたワイヤーハーネスを非対称ダイポールアンテナとその電気映像とみなすことで,ワイヤーハーネス上でのコモンモード電流の定点測定を行い,その測定結果から等価アンテナの電流分布を推定した.その推定結果を基に,等価アンテナを多数の微小ダイポールアンテナの集まりとみなすことで金属板上に配置したワイヤーハーネスからの放射電界を予測する手法を検討し,計算機シミュレーション及び実験により,その有効性を検証した. |
(英) |
In recent years, as the increase of electronic devices installed in automobiles, the number of wire harnesses to be connected has also increased. Electromagnetic radiation noise generated from the common mode current flowing in the wire harness causes malfunction of the on-vehicle electronic equipment. For this reason, the prediction of the radiation field from the wire harness is required from the viewpoint of EMC design.In this study, we apply the concept of equivalent antenna.by applying the concept of equivalent antenna, we regarded the wire harness placed on the metal plate as an asymmetric dipole antenna and its electrical image. Through the measurement of the common mode current on the wire harness at a fixed location, we estimated the current distribution of the equivalent antenna from the measurement result. Furthermore, based on the estimation results of common mode currents, we estimated the radiation electric field from the wire harness placed on the metal plane by considering the equivalent antennas as many small dipoles and verified its effectiveness by computer simulation and experiment. |
キーワード |
(和) |
ワイヤーハーネス / コモンモード電流 / 放射電界 / / / / / |
(英) |
wire harness / common mode current / radiated electric field / / / / / |
文献情報 |
信学技報, vol. 119, no. 124, EMCJ2019-19, pp. 7-10, 2019年7月. |
資料番号 |
EMCJ2019-19 |
発行日 |
2019-07-11 (EMCJ) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMCJ2019-19 |