講演抄録/キーワード |
講演名 |
2018-11-16 11:30
抵抗を装荷したヘアピン形共振器を用いたBPFによる通過帯域の平坦化 ○筑紫友洋・小野 哲・和田光司(電通大) MW2018-109 エレソ技報アーカイブへのリンク:MW2018-109 |
抄録 |
(和) |
本研究では,初めにマイクロストリップ線路構造による共振器に抵抗素子を装荷することによって,共振器の無負荷Q値が制御可能なヘアピン形シングルモード共振器を提案する.抵抗の装荷位置によって共振器の無負荷Q値が制御可能となることを,計算式及び電磁界シミュレーションを用いて示す.共振器に装荷するチップ抵抗素子の数GHz帯での等価回路モデルは一般公開されていないため,抵抗素子を実際に測定することでチップ抵抗素子の等価回路モデルを作成した.今回の主目的であるバンドパスフィルタ(BPF)の通過帯域の平坦化のために,共振器の無負荷Q値の制御に加え,BPF内の電磁界結合を考慮しつつ異なる無負荷Q 値の共振器を並列に結合させることで,減衰極による優れた遮断特性及び平坦な通過帯域を有する4段バンドパスフィルタ(BPF)を構成する.今回の設計手順としては,まず提案するヘアピン形共振器及びオープンループ形共振器をそれぞれ用いて,結合行列より算出した各パラメータを満たすようにそれぞれで回路構造を構成する.そして,通過帯域が平坦となるように,それぞれの構成した回路を接続する線路を回路シミュレータを用いて構成する.最後に,フィルタの回路構造を電磁界シミュレーションを用いて構成し,解析によって特性を確認した. |
(英) |
In this study, firstly, the single mode resistor loaded hairpin shaped resonator is proposed. It is shown using some equations and electromagnetic (EM) simulation that unloaded quality factor can be controlled by setting position of resistor. Secondary, an equivalent circuit of a chip resistor is estimated using measured reflection characteristics of a chip resistor. Furthermore, a fourth order bandpass filter (BPF) having good frequency selectivity caused by attenuation poles and a flat passband is constructed by parallel coupling resonators of different values of unloaded quality factors. In this design procedure, the fourth order BPF is divided to two sections which mean a second order BPF with higher unloaded quality factors and that with lower unloaded quality factors. The second order BPF with higher quality factor is constructed using opened loop shaped resonators. Other BPF with lower quality factor is constructed using resistor loaded hairpin shaped resonators. The design parameters as external quality factors, coupling coefficients, resonant frequencies and unloaded quality factors are calculated using coupling matrix. Also, input/output (I/O) transmission lines between two types of BPF structures are configured. Finally, the circuit structure of the fourth order BPF included I/O transmission lines is configured using EM simulator. It is good agreement with design specification. Sharp frequency selectivity and flat passband characteristics of fourth order BPF are realized. |
キーワード |
(和) |
抵抗装荷ヘアピン形共振器 / オープンループ形共振器 / 帯域通過フィルタ / 周波数選択性 / 通過帯域平坦特性 / チップ抵抗素子 / 結合行列 / |
(英) |
Resistor loaded hairpin shaped resonator / Opened loop resonator / Bandpass filter (BPF) / Frequency selectivity / Flat passband characteristics / Chip resistor / Coupling matrix / |
文献情報 |
信学技報, vol. 118, no. 308, MW2018-109, pp. 89-94, 2018年11月. |
資料番号 |
MW2018-109 |
発行日 |
2018-11-08 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2018-109 エレソ技報アーカイブへのリンク:MW2018-109 |