講演抄録/キーワード |
講演名 |
2018-06-07 15:20
高周波アシスト磁気記録ヘッドのマイクロマグ解析 ~ 狭ギャップライトヘッドと傾いたSTOの組み合わせ ~ ○板垣 諒・金井 靖(新潟工科大)・サイモン グリーブズ・村岡裕明(東北大) MRIS2018-5 エレソ技報アーカイブへのリンク:MRIS2018-5 |
抄録 |
(和) |
マイクロマグネティックシミュレーションを用いて,高周波アシスト磁気記録(microwave-assisted magnetic recording: MAMR)に用いる高周波発振素子(spin-torque oscillator: STO)と記録ヘッドの解析を行っている.高周波発振層(field generation layer: FGL)がヘッド浮上面(air-bearing surface: ABS)に露出したSTOと,主磁極―トレーリングシールド間(MP - TS gap)を媒体に対して傾けた記録ヘッドを組み合わせ, FGLが安定して発振する条件を求めている.記録ヘッドは市販モデル程度の寸法を仮定し,主磁極(main pole: MP)に15°のテーパーを有する.また,サイドシールド(side shield: SS)を配した.まず,記録ヘッドを考慮しないSTO単独モデルの解析を行い, FGLの発振磁界強度は,STOの体積よりも観測点とFGLの距離に依存することを示した.次に,STOと記録ヘッドを組み合わせたモデル解析を行った.STOは記録ヘッドの静磁気相互作用を弱めるため主磁極面ともトレーリングシールド面とも非平行とした. |
(英) |
A micromagnetic model analysis of a spin-torque oscillator (STO) and write head for microwave-assisted magnetic recording was carried out. The write head had tapered main pole and side shields and was based on a cutting-edge, commercial write head. The main pole - trailing shield gap (MP – TS gap) was 20 nm and not parallel to avoid large magnetostatic interactions between the STO and the write head. The STO was integrated inside the gap and was exposed to the head air-bearing surface. First, it was confirmed using a STO model without write head that the field generation layer (FGL) field strength was more dependent on the distance between the FGL and the observation point than the FGL volume. It was also found that a small spin injection layer (SIL) area was not optimal. Next, using a STO model integrated into the MP-TS gap, it was confirmed that STO oscillated stably thanks to non-parallel MP-TS gap and larger SIL area relative to the FGL area. |
キーワード |
(和) |
高周波アシスト磁気記録(MAMR) / スピントルク発振素子(STO) / 記録ヘッド / イクロマグネティック解析 / / / / |
(英) |
Microwave-Assisted Magnetic Recording (MAMR) / Spin Torque Oscillator (STO) / Write Heads / Micromagnetic Simulation / / / / |
文献情報 |
信学技報, vol. 118, no. 74, MRIS2018-5, pp. 25-30, 2018年6月. |
資料番号 |
MRIS2018-5 |
発行日 |
2018-05-31 (MRIS) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MRIS2018-5 エレソ技報アーカイブへのリンク:MRIS2018-5 |