講演抄録/キーワード |
講演名 |
2018-05-24 13:00
[ポスター講演]光電容積脈波法を用いた脈波測定における締め付け圧の影響に関する研究 ○桑原 柚・木本雅也・島崎拓則(阪市大)・四方博之(関西大)・原 晋介(阪市大) RCC2018-1 MICT2018-1 |
抄録 |
(和) |
光電容積脈波法(Photo-Plethysmo-Graphy: PPG)に基づいた脈波測定は,人体の比較的多くの部位で非侵襲に行えるため,近年,ヘルスケアを目的とした多くのウェアラブルデバイスで採用されてきている.PPGセンサは,体表面に締め付けて使用する必要があるが,運動中に脈波の測定を行う場合,締め付け圧が低すぎるとずれや浮きが生じ皮膚表面と密着しなくなるため,脈波に多くの体動ノイズ(Motion Artfact: MA)や異常値(Outliers)が混入し,確度の高い測定が難しくなる.一方で,締め付け圧が高すぎると正確度の高い測定が困難になるだけでなく,装着者に不快感を与える.
本稿では,走行運動中の人間に対してPPGを用いて脈波測定を行うための適切なデータ処理方法,センサモジュールの締め付け圧および測定部位を選択する実験を行った. |
(英) |
Photoplethysmography (PPG) is non-invasive and unobtrusive, so it has been commonly used for heart rate (HR) sensing during exercise. PPG-based HR sensor can be applied for almost any part of human body where there is an artery close to the sensor, just by stabilizing it on the skin surface with belt. When sensing HR for a person during exercise, if the fastening belt pressure is low, on the one hand, the sensor is likely to be separated from the skin surface, so its accuracy becomes lower due to motion artifact (MA). If the fastening belt pressure is high, on the other hand, the sensor is likely to make the person uncomfortable.
In this paper, to investigate the relationship among “effective HR data processing method,” “the position of human body suited for HR sensing” and “adequate belt pressure to fasten the HR sensor,” we conducted an experiment using 21 male subjects during exercises. |
キーワード |
(和) |
光電容積脈波法 / 脈波 / 体動ノイズ / 異常値 / 締め付け圧 / / / |
(英) |
Photoplethysmography / Blood Volume / Motion Artifact / Outliers / Fastening Pressure / / / |
文献情報 |
信学技報, vol. 118, no. 54, MICT2018-1, pp. 1-6, 2018年5月. |
資料番号 |
MICT2018-1 |
発行日 |
2018-05-17 (RCC, MICT) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
RCC2018-1 MICT2018-1 |
|