講演抄録/キーワード |
講演名 |
2018-03-05 15:45
[ポスター講演]メタルライク樹脂による3Dプリンター造形物内への情報埋め込み ○中村耕介(神奈川工科大)・松本知久(中大)・鈴木雅洋(常磐大)・鳥井秀幸・上平員丈(神奈川工科大) EMM2017-85 |
抄録 |
(和) |
3D プリンター造形物にメタルライク樹脂で不可視に情報を埋め込み,埋め込まれた情報をサーモグラフィーで造形物から非破壊に読み出す技術を提案,評価した.本技術では,最初に3Dプリンター用デジタルデータに情報を埋め込む.次に,そのデータと3Dプリンターとで造形物を造形するときに,通常の樹脂で造形物本体を造形し,造形物内部をメタルライク樹脂による微小領域で構造化して造形し,造形物内部のメタルライク樹脂による微小領域構造で情報を表現して造形物内部に情報を埋め込む.造形物内部のメタルライク樹脂による微小領域構造をサーモグラフィーで検出して,検出した構造から埋め込まれた情報を復号する.評価実験では,造形物本体を黒色の樹脂で造形し,造形物内部の微小領域を銅のメタルライク樹脂で造形し,加熱時の表面温度をサーモグラフィーで測定した。その結果,熱画像から造形物内部の微小領域構造を目視で確認することができた.本技術の実現可能性を実証した. |
(英) |
We proposed and evaluated a new technique of invisibly embedding information inside a 3-D printed object with metal-like resin and of nondestructively reading the embedding information from the object by using thermography. In this technique, information is first embedded in the digital data for 3-D printing. Then, the information is also embedded inside a 3-D printed object when the object is fabricated with the data and a 3-D printer. The information inside the object is expressed by constructing the inside with fine domains fabricated with metal-like resin whose thermal conductivity is higher than the main body fabricated with regular resin. The structure of the fine domains inside the object is detected by utilizing thermography, and the information is decoded from the detected structure. In the experiment, the main body was fabricated from black polylactic acid (PLA) resin, the fine domains were fabricated from metal-like resin that contained copper, and thermography was used to detect the structure of the fine domains inside the object. The results obtained from the experiment indicated that the structure of the fine domains inside the object could be detected from the thermal images by eyesight. We demonstrated the feasibility of the technique. |
キーワード |
(和) |
3Dプリンター / 三次元印刷 / デジタルファブリケーション / 付加製造 / 情報ハイディング / / / |
(英) |
3-D Printers / 3-D Printing / Digital Fabrication / Additive Manufacturing / Information Hiding / / / |
文献情報 |
信学技報, vol. 117, no. 476, EMM2017-85, pp. 41-44, 2018年3月. |
資料番号 |
EMM2017-85 |
発行日 |
2018-02-26 (EMM) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMM2017-85 |