講演抄録/キーワード |
講演名 |
2017-11-10 10:50
同軸管とFDTDを用いた複素誘電率の測定法 ○高橋一徳(応用地質)・マーカス レーバー・ヤン イーゲル(LIAG) EMT2017-58 エレソ技報アーカイブへのリンク:EMT2017-58 |
抄録 |
(和) |
土壌など粒状の誘電体に対し、複素誘電率を広帯域で計測する手法として同軸管法が最も一般的に用い られている。この手法では同軸管内に充てんした誘電体に対する反射および透過をベクトルネットワークアナライ ザを用いて測定する。測定した S パラメータより複素誘電率を計算する必要があるが、その新たな解析方法を開発 した。本手法では、FDTD 法による数値計算を順解析として用い、インバージョンを行う。各周波数ごとに正弦波 を入力した時の同軸管内の誘電体モデルの応答を FDTD 法により計算し、モデルの誘電率および導電率を変化させ ながら、S パラメータの測定値と計算値の差を最小化することで複素誘電率の周波数特性を推定する。本稿では、本 手法の基本的な原理、および数種の標準的な誘電体についての解析結果と今後の課題について論じる。 |
(英) |
The coaxial transmission line measurement is the most common technique to measure the complex per- mittivity of granular dielectric materials in wideband. In the technique a coaxial line is filled with a material, and reflection and transmission of electromagnetic waves are measured by a vector network analyser. Determining the complex permittivity of the material requires an analysis of the measured S-parameters. A new analysis method is developed. The method uses FDTD simulations as a forward modelling. The response of a dielectric material modelled in a coaxial line is calculated by the FDTD method with inputing sine waves of different frequencies, and the frequency dependencies of permittivity and conductivity are determined iteratively by updating parameters as the error between the measured and modelled S-parameters is minimised. The report discusses the principle of the method, results obtained for some dielectric materials and considerations for further developments. |
キーワード |
(和) |
複素誘電率 / 同軸管法 / 逆問題 / FDTD法 / / / / |
(英) |
complex permittivity / coaxial transmission line method / inverse problem / FDTD / / / / |
文献情報 |
信学技報, vol. 117, no. 289, EMT2017-58, pp. 115-120, 2017年11月. |
資料番号 |
EMT2017-58 |
発行日 |
2017-11-02 (EMT) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMT2017-58 エレソ技報アーカイブへのリンク:EMT2017-58 |