講演抄録/キーワード |
講演名 |
2017-06-29 15:55
3Dプリンター造形物への高反射率材料による情報埋め込みと近赤外線撮像による情報読み出し ○中村耕介・松本知久(神奈川工科大)・鈴木雅洋(常磐大)・鳥井秀幸・上平員丈(神奈川工科大) IE2017-30 |
抄録 |
(和) |
3D プリンターで実物体を造形する際に同時に内部を構造化して情報を埋め込む技術について,本報告では2ノズルの熱溶解式3Dプリンターを用いて,内部の構造化として高反射率材料でパタンを形成して情報を表現する方法,およびこの内部パタンを近赤外線カメラで透視画像として撮像し,埋め込んだ情報を読み出す方法を検討したので報告する.青色のPLA樹脂を母体材料として用い,反射率の高い白色のPLA樹脂で形成した小さな正方形パタンを多数埋め込み,所定の位置におけるこのパタンの有無で2進情報を表現した.透視画像における所定位置の輝度とその周辺部の輝度との差でその位置のパタンの有無を判定することにより埋め込まれた2進情報の読み出しを試みた.埋め込むパタンのサイズや造形物の外殻の厚みなどをパラメータとした実験から,埋め込んだ情報の読み出し確度は外殻の厚みに依存するが,厚みが2 mm以下では100%の確度で情報の読み出しが可能であることがわかった.さらにこの条件では埋め込んだ情報の不可視性と可読性をともに満足できることを明らかにした. |
(英) |
This report describes a technique that can embed information inside 3D printed objects by forming fine patterns inside the objects as a watermark. The fine structures inside the object are formed using high reflectance material. The disposition of the fine patterns expresses binary code depending on whether or not they were at a designated position. This report also presents a technique that can non-destructively read out information embedded inside real objects using a transparent image of the object captured with a near infrared camera. We conducted experiments to evaluate the accuracy in reading out information. We produced samples with a fused deposition-modeling 3D printer, and blue and white polylactide resins were used as body material and fine patterns that have high reflectance, respectively. The results obtained from the experiments demonstrated that 100% accuracy could be achieved when the thickness of the outer shell of the fabricated object was less than 2 mm. We also confirmed that there were conditions where readability and invisibility were satisfied simultaneously. |
キーワード |
(和) |
デジタルファブリケーション / 情報ハイディング / 3Dプリンター / 著作権 / / / / |
(英) |
Digital Fabrication / Information Hiding / 3-D Printer / Copyright / / / / |
文献情報 |
信学技報, vol. 117, no. 113, IE2017-30, pp. 29-33, 2017年6月. |
資料番号 |
IE2017-30 |
発行日 |
2017-06-22 (IE) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
IE2017-30 |