講演抄録/キーワード |
講演名 |
2017-06-09 09:40
デュアルSIL構造をもつSTOにおいて注入電流密度低減のためのSILの飽和磁化及び膜厚 ○加瀬愛菜・上村朋子・赤城文子・吉田和悦(工学院大) MR2017-7 エレソ技報アーカイブへのリンク:MR2017-7 |
抄録 |
(和) |
磁気ディスク装置の高記録密度化を実現する手法の1つとしてマイクロ波アシスト磁気記録方式(microwave assisted magnetic recording:MAMR)が提案されている.これは,スピントルク発振素子(Spin Torque Oscillator: STO)を用いて記録をアシストする方式である.MAMR方式を実現するためには,STOに印加される注入電流密度Jを1 ×10^{12} A/m^2以下にする必要がある.そこで,昨年FGLの両側にSILを設けるデュアルSIL構造がJ. G. Zhuにより提案された.本研究では,透過のスピントルク磁界を与えるSILの飽和磁化と膜厚を変化させ,Jをどこまで低減できるかLLGシミュレーションにより検討した.その結果,飽和磁化を0.5 T,膜厚を1.25 nmにすることで,Jを目標以下の9.12×10^{11} A/m^2まで低減できた. |
(英) |
Microwave assisted magnetic recording(MAMR) is one of the promising recording methods to achieve high magnetic recording of a hard disk drive. MAMR assists magnetic recording using the spin torque oscillator (STO). Injection current density applied the STO is required lower than 1 ×10^{12} A/m^2. Then, last year, J. G. Zhu proposed a dual SIL methods with SIL on both side of FGL. In this study, influence of saturation magnetization (M_s) and thickness of SIL giving transmission spin torque filed for reduction of injection current density were investigated using LLG simulator. As a result, when M_s = 0.5 T and thickness = 1.25 nm, injection current density can reduce 9.12×10^{11} A/m^2, which is lower than the target value. |
キーワード |
(和) |
マイクロ波アシスト磁気記録 / デュアルSIL構造 / 注入電流密度 / / / / / |
(英) |
Microwave assisted magnetic recording / Dual SIL / Injection current density / / / / / |
文献情報 |
信学技報, vol. 117, 2017年6月. |
資料番号 |
|
発行日 |
2017-06-01 (MR) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MR2017-7 エレソ技報アーカイブへのリンク:MR2017-7 |