講演抄録/キーワード |
講演名 |
2016-12-15 16:40
センダスト粒子をポリスチレンに分散させた複合二層型電磁波吸収体の吸収特性の評価に関する研究 ○梅本成貴・久保田 匠・吉田隆彦・佐藤祐喜・吉門進三(同志社大) MW2016-150 エレソ技報アーカイブへのリンク:MW2016-150 |
抄録 |
(和) |
軟磁性材料のセンダスト(Fe:85%-Si:10%-Al:5%)をポリチレン樹脂に分散させた複合体は高周波領域で広帯域な吸収特性を示すことが報告されている。最も広帯域化が実現できたのは,平均粒径3.5 μmセンダストの体積混合率20.0 vol%付近の複合体で, 吸収中心周波数8 GHz付近で規格化‒20 dB 吸収帯域幅はおよそ29 %であった。これは, 市販の吸収体(約 10 %)と比べて極めて広帯域なものであった。センダストをポリチレン樹脂に分散させた複合電磁波吸収体を実用化するためには吸収周波数の広帯域化に加え,斜入射特性の改善も必要である。本研究では先ず電磁波吸収帯域の広帯域化を目指して, 2.5 -18 GHz の周波数範囲で動作する二層型電磁波吸収体を作製し吸収特性を評価した。複合体の複素比透磁率と複素比誘電率の値から二層型電磁波吸収体の設計を行いリターンロスの周波数特性を計算した。測定値と計算値の比較を行った結果おおよその一致が得られた。 |
(英) |
It has been reported that the composite made of sendust (Fe-Si-Al) particles dispersed in polystyrene resin can be used as an broadband electromagnetic absorber in the frequency range above several GHz. In order to broaden the absorption frequency bandwidth, it is important that the non- reflective condition is satisfied in the desired frequency range in designing an absorber. The maximum normalized −20 dB absorption bandwidth for the composite containing the spherical sendust particles with average particle size of 3.5 μm was approximately 29 % for the volume ratio of sendust particle of ≈ 20 vol%, which was much larger than that of commercially available absorbers (less than approximately 10 %). In order to commercialize the composites absorbers made of sendust particle dispersed in polystyrene resin, it is necessary to improved absorption bandwidth furthermore. In this study, in order to improve the absorption frequency bandwidth, the double-layered electromagnetic wave absorbers,which operate in the frequency range between 2.5‒18 GHz. The frequency dependence of return loss was calculated using the values of the complex relative permeability and the complex relative permittivity. Measured values of return loss agreed with the calculated value. |
キーワード |
(和) |
二層型電磁波吸収体 / 広帯域吸収 / センダスト粒子 / ポリスチレン樹脂 / リターンロス / / / |
(英) |
Double Layered Electromagnetic Wave Absorbers / Wide band Absorption / Sendust Particles / polystyrene resin / Return Loss / / / |
文献情報 |
信学技報, vol. 116, no. 363, MW2016-150, pp. 101-106, 2016年12月. |
資料番号 |
MW2016-150 |
発行日 |
2016-12-08 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2016-150 エレソ技報アーカイブへのリンク:MW2016-150 |