講演抄録/キーワード |
講演名 |
2016-12-09 13:25
高消光比を有する多モード干渉計型電界吸収型光変調器の提案 ○沖津大輔・山野 祐(横浜国大)・盧 柱亨(関東学院大)・荒川太郎(横浜国大) OPE2016-113 エレソ技報アーカイブへのリンク:OPE2016-113 |
抄録 |
(和) |
電界吸収型光変調器(EAM)と1入力-1出力型多モード干渉素子(MMI)を組み合わせた多モード干渉計型電界吸収型光変調器(MMI-EAM)を提案し,ビーム伝搬法(BPM)を用いて最適設計および動作特性解析を行った.コア層の多重量子井戸におけるEA効果に加えて,電界印加部を部分的に配置し電界誘起屈折率変化を生じさせることで光伝搬の対称性を崩し,結像点がずれる効果を用いる.両者の相乗効果により,同サイズの従来型EAMと比較して消光比が大きく向上する.構造の最適化を行い,幅6 ミクロン,長さ152ミクロンのMMI-EAMでは,従来のEAMと比較して25 dB以上の消光比の増大と動作電圧の低減が期待できることがわかった.また,作製トレランスについても議論する. |
(英) |
An electroabsorption modulator with a 1×1 multimode interference waveguide (MMI-EAM) is proposed. A partial EA region is asymmetrically placed in the MMI. In a multiple quantum well core layer of the region, the electrorefractive (ER) index change is also exhibited in addition to the EA effect, which leads to the change in the position of an imaging point at the output port of the MMI waveguide. Owing to the combination of the EA effect and ER index change, the extinction ratio is expected to be drastically improved compared with a conventional EAM with almost the same area of the EA region. The optimization of the MMI-EAM structure is discussed and its modulation characteristics are investigated theoretically using a beam propagation method (BPM). The results show that the improvement in extinction ratio of more than 25 dB can be expected in the MMI-EAM with the length of 152 microns and the width of 6 microns. |
キーワード |
(和) |
多モード干渉計 / 電界吸収型光変調器 / 多重量子井戸 / 高消光比 / / / / |
(英) |
Multimode Interference / Electroabsorption Optical Modulator / Multiple Quantum Well / High Extinction Ratio / / / / |
文献情報 |
信学技報, vol. 116, no. 349, OPE2016-113, pp. 51-56, 2016年12月. |
資料番号 |
OPE2016-113 |
発行日 |
2016-12-01 (OPE) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OPE2016-113 エレソ技報アーカイブへのリンク:OPE2016-113 |