講演抄録/キーワード |
講演名 |
2016-05-20 13:35
銅ランナーを伴う電気接点対間で磁気吹き消しされる開離時アークの連続的な再点弧の発生条件 ○宮川晴希・関川純哉(静岡大) EMD2016-1 エレソ技報アーカイブへのリンク:EMD2016-1 |
抄録 |
(和) |
直流高電圧回路において,Ag接点対の上部に銅のアークランナーを取り付け,接点対を等速開離し開離時アークを発生させ,磁気吹き消しさせた.接点接触時の回路電流I0=10Aとし,陰極ランナーの位置dを0.5,1,2,3,4mm及び陰極ランナーなしの場合において,電源電圧Eを200V,250V,300V,400V,450Vと変化させ実験を行った.その結果,d =2mm以上になると急激に再点弧の回数が減少した.また,d=0.5,1mmの場合には,連続的な再点弧が発生し,その再点弧発生時のアーク電界の強さはd=2, 3, 4mmの場合より小さくなった. |
(英) |
Copper arc runners are fixed on silver electrical contacts. Break arcs being magnetically blown-out of are generated between the contacts in a 450VDC resistive circuit. Circuit current when contacts are closed is 10A. Placements of cathode runner d are changed 0.5, 1, 2, 3, 4mm and without cathode runner. Supply voltage is changed from 200V to 450V at d=0.5, 1, 2, 3, and 4mm and without cathode runner. The following results are shown. The number of reignitions decreases rapidly when d is 2mm and over. In cases of d=0.5 and 1mm, the arc electric field when successive reignitions occur is lower than those of other conditions. |
キーワード |
(和) |
電気接点 / 電磁リレー / 高速度カメラ / アーク輝点 / / / / |
(英) |
Electrical contacts / Electromagnetic relay / High-speed camera / Arc spots / / / / |
文献情報 |
信学技報, vol. 116, no. 55, EMD2016-1, pp. 1-6, 2016年5月. |
資料番号 |
EMD2016-1 |
発行日 |
2016-05-13 (EMD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMD2016-1 エレソ技報アーカイブへのリンク:EMD2016-1 |