講演抄録/キーワード |
講演名 |
2016-02-29 13:20
空中超音波を用いた共振法による減肉検査 ○田中雄介・大橋保宏・小倉幸夫(ジャパンプローブ) US2015-112 |
抄録 |
(和) |
構造物の厚さを非接触で片面から共振法により計測する方法を提案した。空中超音波で対象物に超音波を送信し、発生した共振信号を計測する。共振信号は対象物の材質、厚さにより特定の周波数が含まれる。共振信号の周波数を調べることで対象物の厚さを推定した。基礎実験として10[mm]から15[mm]の厚さの鋼板を共振法で計測し、それぞれの厚さを推定した。また、探触子と対象物との距離を変化させることで共振の発生が変化することを確かめた。減肉検査の模擬実験として円形に削った試験体を用いて共振法による観測を行い、健全部と減肉部において共振状態が異なることを確認した。 |
(英) |
We developed measuring technique for thickness of structure by resonance method from one side without contacting. Ultrasonic waves were transmitted to the object in air, and resonanced signals were measured. The resonanced signals include in particular frequency that depending on the thickness and material of the object. The thickness of the steel plate of 10[mm] to 15[mm] were measured by the resonance method, and each thickness of the steel were measured. The distance between the probe and the object was changed, and it was confirm that the resonance was changed. The test block of thinning was observed by resonance method, the healthy portion and the reduced thickness portion. |
キーワード |
(和) |
超音波 / 共振法 / 非接触 / 板厚計測 / 減肉計測 / / / |
(英) |
Ultrasonic / Resonance Method / Non-contact / Thickness Measurement / Thinning Detection / / / |
文献情報 |
信学技報, vol. 115, no. 464, US2015-112, pp. 23-27, 2016年2月. |
資料番号 |
US2015-112 |
発行日 |
2016-02-22 (US) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
US2015-112 |
|