講演抄録/キーワード |
講演名 |
2015-05-29 14:10
異方性材料の誘電率温度依存性測定 ○坪谷嘉人・二川佳央・大屋隆生(国士舘大) MW2015-32 エレソ技報アーカイブへのリンク:MW2015-32 |
抄録 |
(和) |
マイクロ波領域における材料の誘電率,透磁率等の電磁気的特性は材料の温度に依存する.マイクロ波エネルギーを応用する際に,マイクロ波照射対象となる材料の複素誘電率の異方性の温度特性は,マイクロ波を照射するためのアプリケータや共振器などを含むプロセス装置の設計開発にとって重要なパラメータであり,幅広い温度範囲の特性評価が望まれている.
本実験では,空洞共振器内部に置かれた等方性や異方性を持つ材料に対して,マイクロ波エネルギーを照射し,マイクロ波加熱により,材料の温度を常温から高温に至るまで変化させると同時に,照射と同一のマイクロ波を計測に用いることで加熱材料の複素誘電率の温度特性評価を行い,等方性と異方性を持つ材料の特性の違いと,異方性誘電率を持つ木質材料の構造変化による特性の違いを検証した. |
(英) |
To measure the temperature dependent complex permittivity of material, measuring systems using cylindrical cavity resonator at a frequency of 2.45 GHz have been developed. To measure low loss material with wide temperature range, TM010 mode cavity resonator system exited by RF power amplifier has been applied. By measuring transmission or reflection coefficient of the cavity with the temperature using infrared thermograph, the temperature depending anisotropic complex permittivity can be obtained. The measuring accuracy of anisotropic complex permittivity using perturbation method is discussed by comparing the results from rigorous analysis for the TM010 mode cylindrical cavity resonator. By using the developed systems, temperature dependent anisotropic permittivity for material have been measured. |
キーワード |
(和) |
マイクロ波応用 / プロセス装置 / 異方性複素誘電率 / 温度依存特性 / 木質材料 / 構造変化 / / |
(英) |
Microwave application / Processing equipment / Anisotropic complex permittivity / Temperature dependency / Wood material / Structural change / / |
文献情報 |
信学技報, vol. 115, no. 66, MW2015-32, pp. 67-70, 2015年5月. |
資料番号 |
MW2015-32 |
発行日 |
2015-05-21 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2015-32 エレソ技報アーカイブへのリンク:MW2015-32 |