講演抄録/キーワード |
講演名 |
2015-05-22 14:25
ミリ波マイクロストリップコムラインアンテナの給電線路垂直面ビームチルト設計によるマルチビーム切替え電子走査アンテナ ○榊原久二男・中澤大輝・菊間信良(名工大) AP2015-30 |
抄録 |
(和) |
様々な指向性走査アンテナがある中,異なる方向に指向性を有するアンテナを配列し,これらを高周波スイッチなどで切替える指向性走査アンテナは,特別な給電回路が不要なため,簡易な指向性電子走査アンテナとして,現実的な構成の一つである.マイクロストリップコムラインアンテナは,放射素子の接続位置で励振位相を制御できることから,複数のコムラインアンテナを配列したとき,給電線路間だけでなく,同じ給電線路内でも逆方向に接続した放射素子に異なる放射位相を与えることで,実効的な素子間隔が線路間隔の約半分に短縮され,グレーティングローブを発生することなく,給電線路と垂直な面に指向性を傾けることができる.本研究では,3列の各給電線路の両側に放射素子を配列したマイクロストリップコムラインアンテナについて,5つの異なる方向に指向性を有する5つのアンテナをそれぞれ設計し,これらを配列して切替える方式で,電子走査アンテナを構成した.本論文ではその設計手法を解説し,電磁界解析により特性を評価した結果を示す. |
(英) |
A beam-switching antenna which is composed of some independent antennas with different beam directions is one of the reasonable solutions of electronic beam-scanning antenna because of its simple feeding configuration. Microstrip comb-line antenna is capable to control the excitation phase of the radiating element by the connection point due to its traveling-wave operation. In the design of the beam tilting antenna in the perpendicular plane to the feeding line, the excitation phase of the elements are controlled not only by the feeding phase of the feeding line but also by the connection point of the element at the both sides on the feeding line. The effective element spacing becomes almost half, therefore, the grating lobe does not appear in beam-tilting. A five-beam switching planar antenna using five different microstrip comb-line antennas with different beams is proposed in this paper. The simulated performance is demonstrated in this paper. |
キーワード |
(和) |
マイクロストリップアンテナ / アレーアンテナ / コムラインアンテナ / 電子指向性走査 / / / / |
(英) |
Microstrip Antenna / Array Antenna / Comb-line Antenna / Electronic Beam-scanning / / / / |
文献情報 |
信学技報, vol. 115, no. 40, AP2015-30, pp. 63-67, 2015年5月. |
資料番号 |
AP2015-30 |
発行日 |
2015-05-14 (AP) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
AP2015-30 |