講演抄録/キーワード |
講演名 |
2015-05-15 14:00
テーパー線路インピーダンス変換器の製作に関する一検討 ○細川裕基・石川翔也・草間裕介(香川高専) EST2015-6 エレソ技報アーカイブへのリンク:EST2015-6 |
抄録 |
(和) |
本研究室では,MSLを題材としたRFデザインエンジニア育成プログラムの開発検討を行っている.まず,韓国Man&tel社製のマイクロ波実験キットMW-1000のテーパー線路インピーダンス変換器を模範として.理論計算とHFSS,測定の3点から比較検討を行った.理論計算においては,テーパー部分の階段近似による不連続を考慮したところ,HFSSに極めて近い結果を示した.また,設計・製作から測定に至る一連のプロセスを学ぶために,FR4基板によるサンプル回路を製作して同様の比較検討を行った.この結果,比較的良好な結果が得られたため,RFデザインインジニア育成プログラムの一つとして有効であることが分かった.今後は,サンプル回路の数を増やし,測定値と計算値の差の原因を詳細に検討する予定である. |
(英) |
In our laboratory, Development of a training program for RF design engineer is under investigation. First, tapered line impedance transformer which is one of the microwave experimental kit called MW-1000 manufactured by Man & tel Co. was selected for an analysis example. And it was investigated with the object of theory, HFSS and measurement. Second, similar investigation was conducted by manufacturing a sample circuit using FR-4 substrate to experience a set of process from the design to measurement. In result, relatively good agreement was obtained between theoretical results, HFSS and measurement. We found it is applicable to a training program for RF design engineer. In future study, we will examine the difference between calculated and measured characteristics in detail by increasing the number of sample circuit. |
キーワード |
(和) |
MSL / RFデザインエンジニア育成プログラム / MW-1000 / テーパー線路インピーダンス変換器 / / / / |
(英) |
MSL / Training Program for RF Design Engineer / MW-1000 / Tapered Line Impedance Transformer / / / / |
文献情報 |
信学技報, vol. 115, no. 33, EST2015-6, pp. 27-32, 2015年5月. |
資料番号 |
EST2015-6 |
発行日 |
2015-05-08 (EST) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EST2015-6 エレソ技報アーカイブへのリンク:EST2015-6 |
|