講演抄録/キーワード |
講演名 |
2014-12-15 13:30
ダイヤモンド焼結体の超音波研磨加工に関する基礎的研究 渡辺健志・後藤隆司(日進工具)・○神 雅彦(日本工大) US2014-65 |
抄録 |
(和) |
ダイヤモンド焼結体(PCD)製エンドミルは,超硬合金やSiCセラミックスなどの超高硬度の金型や機械部品を精密かつ高能率に仕上げ加工することができる切削工具として期待されている.同エンドミルの刃部の製作に関して,刃部の形成に対しては,ワイヤー放電加工法(WEDM)により,従来の研削加工法に比べて効率的に加工することが可能となった.しかしながら,すくい面と逃げ面からなる切れ刃エッジの仕上げに関しては,有効な手段がないのが現状である.
本研究では,PCDエンドミル切れ刃の効率的な仕上げ加工法として,超音波振動を援用した研磨法を検討した.すなわち,スクエアエンドミルのすくい面と逃げ面の研磨に関しては,ラップに超音波振動を与える研磨法を検討した.一方,ボールエンドミルに関しては,バレル研磨におけるバレルに超音波振動を与え,砥粒の動きを活発化させる方法を検討した.それらの結果,研磨効率が従来法の3倍以上になることを明らかにし,PCDエンドミルの効率的な切れ刃仕上法を提案することできた. |
(英) |
Polycrystalline diamond (PCD) end mills are expected as a novel cutting tool that can finish the molds and machine parts made of super-hard materials, such as tungsten carbide and sintered silicon carbide (SiC), with high precision and high efficiency. On the manufacturing of cutting part of the PCD-end mill, the profile of cutting part is formed more efficiently by wire electrical discharge machining (WEDM) than that of conventional grinding process. However, there is no efficient processes for the finishing of the cutting edge.
This study aims at investigation of the effect of the assistance of ultrasonic vibration to abrasive process on the finishing of cutting edge of the PCD-end mill. Concretely, the ultrasonic lapping process is investigated, for the finishing of rake face and relief face of the cutting edge in the square-end mill, and the ultrasonic barreling process is investigated, for the finishing of ball cutting edge in the ball-end mill.
The finishing efficiency in the ultrasonic-vibration assisted processes is more than twice as high as that of conventional method. Thus, we proposed an efficient finishing method of the cutting edge of the PCD-end mill. |
キーワード |
(和) |
ダイヤモンド焼結体 / エンドミル / 超硬合金 / SiCセラミックス / 超音波振動 / 超音波振動ラッピング / 超音波振動バレル加工 / |
(英) |
polycrystalline diamond / end mill / tungsten carbide / sintered silicon carbide / ultrasonic vibration / ultrasonic lapping / ultrasonic barreling / |
文献情報 |
信学技報, vol. 114, no. 363, US2014-65, pp. 1-4, 2014年12月. |
資料番号 |
US2014-65 |
発行日 |
2014-12-08 (US) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
US2014-65 |