講演抄録/キーワード |
講演名 |
2014-09-18 15:40
3Dプリンター造形物内部に埋め込んだ情報のサーモグラフィによる非破壊読出し ○ピヤラット シラパスパコォンウォン・鈴木雅洋・上平員丈(神奈川工科大)・高嶋洋一(NTT)・海野 浩(神奈川工科大) LOIS2014-20 IE2014-33 EMM2014-50 |
抄録 |
(和) |
本研究では,3Dプリンター造形物内部に空洞によって埋め込んだ著作権情報を,サーモグラフィを用いて非破壊的に読み出せるか検討した.著作権情報を3Dプリンター造形物内部の空洞によって埋め込む技術は,これまでにも検討されたが,情報の読み出し方法が簡便ではない点が問題であった.本研究で検討した方法では,表面の近傍に空洞を設けた造形物を加熱して,表面の熱分布に基づいて空洞の有無を識別する.加熱する装置とサーモグラフィとがあれば情報を読み出すことができるので,X線撮像を必要とした従来技術と比較すれば,極めて簡便な方法である.評価実験の結果,熱分布画像を目視して空洞の有無を識別できることが明らかとなり,この方法が実現可能であることを実証した. |
(英) |
This study presents nondestructive readout of information hidden in objects fabricated with 3-D printers. Although conventional techniques can hide information in objects fabricated objects with 3-D printers to protect copyright of digital data for 3-D printing, readout of the hidden information is difficult because of taking X-ray photograph. In a technique presented in this study, fabricated objects that have cavities near the surface are heated, and the spatial pattern of cavities are detected based on the temperature distribution on the surface. This technique requires only a heating device and a thermography; therefore, it is easier than conventional techniques. In the evaluation, an experiment was conducted to examine whether the spatial pattern of cavities could be detected by eyesight, and the results obtained from this experiment demonstrated that the technique was feasible. |
キーワード |
(和) |
デジタルファブリケーション / 3Dプリント / 3Dプリンター / 著作権 / / / / |
(英) |
Digital Fabrication / 3-D Printing / 3-D Printer / Copyright / / / / |
文献情報 |
信学技報, vol. 114, no. 222, EMM2014-50, pp. 37-40, 2014年9月. |
資料番号 |
EMM2014-50 |
発行日 |
2014-09-11 (LOIS, IE, EMM) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
LOIS2014-20 IE2014-33 EMM2014-50 |