講演抄録/キーワード |
講演名 |
2014-07-11 15:45
紫外線硬化樹脂と超音波振動を用いたレンズアレイの作製 ○谷口聡紀・小山大介(同志社大)・中村健太郎(東工大)・松川真美(同志社大) US2014-31 |
抄録 |
(和) |
レンズアレイは現在カメラモジュールや液晶画面など様々な製品に用いられている.本報告では,紫外線硬化樹脂と超音波の音響放射力を用いた新たなレンズアレイの作製手法を提案し,樹脂硬化の評価を行った.レンズアレイ作製過程として,ガラス基板上に4つの超音波振動子を接着し,基板上に紫外線硬化性のゲル膜を塗布した.振動子に電気信号を入力することで,格子状のたわみ振動モードが基板上に発生し,振動分布に対応した音響放射力がゲル膜表面に作用し,ゲルは変形する.ゲル変形時に紫外線照射を行うことで,形状変化を保ったまま硬化し,紫外線照射後およそ20分でレンズアレイを作製することができた.樹脂硬化の評価を行うため,硬化する際のアドミタンス特性の時間変化を測定した結果,Q値は徐々に減少し,レンズアレイが形成されることでゲルは抵抗および付加質量として作用することがわかった. |
(英) |
An optical lens array is used various field such as camera modules and liquid crystal displays. In this report, a new fabrication technique of a lens array was proposed using ultraviolet curable resin and ultrasound vibration, and the hardening characteristics of the gel were investigated. An ultraviolet curable gel film was formed on a glass plate having four PZT transducers. By exciting the transducers, the lattice flexural vibration was generated on the glass plate. The acoustic radiation force that correlates to the vibration mode was generated to the gel surface, and the gel was deformed. The lens array could be formed for 20 minutes under ultraviolet light irradiation with keeping the deformation. The quality factor of the transducer resonance was measured in order to investigate the curing of resin, and the quality factor decreases with time. It was found that the gel acts as the damper and additional mass as the lens array was formed. |
キーワード |
(和) |
レンズアレイ / 紫外線硬化樹脂 / 音響放射力 / たわみ振動 / / / / |
(英) |
Lens array / Ultraviolet curable resin / Acoustic radiation force / Flexural vibration / / / / |
文献情報 |
信学技報, vol. 114, no. 137, US2014-31, pp. 31-34, 2014年7月. |
資料番号 |
US2014-31 |
発行日 |
2014-07-04 (US) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
US2014-31 |