講演抄録/キーワード |
講演名 |
2014-07-10 15:20
電源ケーブルからICへ侵入する外来妨害波の注入方法による比較 ○前島一仁・五百旗頭健吾(岡山大)・渡辺哲史(岡山県工技センター)・豊田啓孝(岡山大) EMCJ2014-22 |
抄録 |
(和) |
本報告では, パルスの注入環境を変化させたときにボード上で観測されるノイズの変化を観測した. 実験系は電気的ファストトランジェント/バースト (EFT / B) 試験器, 結合回路, プリント回路基板 (Printed Circuit Board: PCB) で構成した. 結合回路には結合・減結合回路網 (Coupling Decoupling Network: CDN), カレントプローブを適用し, 容量性結合と磁界結合を試した. 注入するパルスについては正パルスと負パルスの2通りのパルス注入を試した. 更に, PCBグラウンドはシステムグラウンドから浮いている状態と接地された状態の2通りを試した. PCBには暗号回路が実装されたFPGAが搭載されておいる. 暗号回路動作中にバーストパルスを注入し, その時のPCB主電源電圧およびICコア電圧, クロック信号の変動をオシロスコープにより観測した. |
(英) |
In this paper, influence on the noise observed on a board by changing pulse injection configurations. The experiment system consists of Electrical Fast Transient / Burst (EFT / B) generator, coupler and Printed Circuit Board (PCB). A Coupling Decoupling Network (CDN) and a current probe were applied to coupler in order to attempt capacitive coupling and magnetic coupling. Positive pulse injection and Negative Pulse injection ware also tried. Furthermore, two kinds of states were attempt: the PCB’s ground was connected or non-connected to system ground. The PCB has a Field-Programmable Gate Array (FPGA) implemented an encryption circuit. A burst pulse was injected to PCB while the encryption circuit is running. Power supply voltage of the PCB, the IC core voltage and clock signal was observed by an oscilloscope at that moment. |
キーワード |
(和) |
環境電磁工学(EMC) / イミュニティ / / / / / / |
(英) |
Electromagnetic Compatibility(EMC) / immunity / / / / / / |
文献情報 |
信学技報, vol. 114, no. 129, EMCJ2014-22, pp. 31-36, 2014年7月. |
資料番号 |
EMCJ2014-22 |
発行日 |
2014-07-03 (EMCJ) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMCJ2014-22 |