講演抄録/キーワード |
講演名 |
2014-03-14 14:00
高シート抵抗の金属被覆した不織布を配置したマイクロストリップ線路の伝導ノイズ抑制効果 室賀 翔・○浅妻裕己・山口正洋(東北大)・田中智也・岡村知恵・岡嶋真一・加藤一史(旭化成せんい) EMCJ2013-133 |
抄録 |
(和) |
プリント配線板のノイズ対策のためのノイズ抑制シートとして,高電気抵抗の不織布が提案されている.本研究では,この高電気抵抗の不織布および連続導体をマイクロストリップ線路上に配置した場合における伝導ノイズ抑制効果に違いが生ずるかどうか,また生じた場合はその原因を考察することを目的とし,IEC62333-2規格を参考に作製したマイクロストリップ線路上に80 mm角の不織布および連続導体を配置した場合における入力損失比を比較した.この結果,不織布の繊維の方向と信号線の長手方向を平行および直交した場合の入力損失比に差異が生じることを示した.更に,不織布を配置した場合,0.4から1.5 GHzにおいて,連続導体と比較して16 %高い損失が得られることを示した. |
(英) |
As a solution to on-board-level the electromagnetic compatibility problem, a metal-coated non-woven fabric with high sheet resistance is proposed. In this paper, we compared the conductive noise suppression in a microstripline (MSL), which was prepared with reference to the IEC62333-2, using the 80 x 80 mm sized non-woven fabric and 80 x 80 mm sized continuous conductors to clarify whether there is the difference and to clarify what the factor that makes the difference. As a result of this, we showed that there is the difference in the loss in the MSL when the direction of fibers of the nonwoven fabric is perpendicular and parallel to the direction of the signal line. In addition to this, we showed that the loss in the MSL using the non-woven fabric is 16 % greater than the loss in the MSL using continuous conductors from 0.4 to 1.5 GHz. |
キーワード |
(和) |
EMC / ノイズ抑制シート / 不織布 / 伝導ノイズ / IEC62333-2 / MSL / シート抵抗 / |
(英) |
EMC / Noise Suppression Sheet / Non-woven Fabric / Conductive Noise / IEC62333-2 / MSL / Sheet Resistance / |
文献情報 |
信学技報, vol. 113, no. 494, EMCJ2013-133, pp. 7-10, 2014年3月. |
資料番号 |
EMCJ2013-133 |
発行日 |
2014-03-07 (EMCJ) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMCJ2013-133 |