講演抄録/キーワード |
講演名 |
2013-12-16 14:20
高精度スペクトル計測に向けたF帯InP HEMT基本波ミキサの開発 ○芝 祥一・佐藤 優・松村宏志・高橋 剛・鈴木俊秀・中舍安宏・原 直紀(富士通) ED2013-93 エレソ技報アーカイブへのリンク:ED2013-93 |
抄録 |
(和) |
110 GHzを超える周波数での高精度スペクトル計測を目的として,InP HEMT技術を用いた広帯域基本波ミキサを開発した.ミキサにはドレイン端子にLO/RF信号とIF信号を分離するデュプレクサを集積しており,レジスティブ動作およびドレインLO注入型動作が可能である.オンウェハでの評価を行い,ドレインLO注入型動作では,LO周波数110 GHz,RF周波数116 GHzで変換損失3 dBが得られた.LOパワーは3 dBmと小さく,IF帯域幅も20 GHz以上を確保できた.一方,同じチップのレジスティブ動作では変換損失は6.5 dBだったものの,帯域は30 GHzと広い特性が得られた.このチップをモジュールに実装し,モジュール化後の特性評価も行った.低い変換損失,広帯域,低いLOパワーの特性から,高精度計測や通信システムへの応用に有望である. |
(英) |
A broadband, single fundamental mixer is developed by using InP HEMT technology for use in precise spectrum analysis at frequencies above 110 GHz. The mixer has a duplexer at the drain terminal separating LO/RF signals from an IF signal and functions in both resistive and drain-LO-injection modes. In the drain-LO-injection mode, a conversion loss of 3 dB is measured on-chip. The drain-LO-injection mixer exhibits an IF bandwidth of more than 20 GHz on a wafer at an RF frequency of 116 GHz with an LO signal of 110 GHz and LO power of only 3 dBm. On the other hand, a conversion loss of 6.5 dB and an IF bandwidth of more than 30 GHz are measured on-chip in the resistive mode. The mixer chip is mounted in a module package, and we report on design and characterization of the mixer and module package. Our mixer module shows low conversion loss, wide bandwidth, and low LO power performance, thereby it is one of the best candidate for precise spectrum measurement or wireless communication systems. |
キーワード |
(和) |
ミリ波・テラヘルツ波 / InP HEMT / 基本波ミキサ / レジスティブミキサ / ドレインLO注入ミキサ / 導波管-マイクロストリップ線路変換 / / |
(英) |
millimeter-wave / InP HEMT / fundamental mixer / resistive mixer / drain-LO-injection mixer / waveguide to microstrip transition / / |
文献情報 |
信学技報, vol. 113, no. 357, ED2013-93, pp. 19-23, 2013年12月. |
資料番号 |
ED2013-93 |
発行日 |
2013-12-09 (ED) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
ED2013-93 エレソ技報アーカイブへのリンク:ED2013-93 |