講演抄録/キーワード |
講演名 |
2013-11-15 15:30
分布振動モード形スピーカの振動特性解析手法 ○高柳昂平・鮫島俊哉・河原一彦(九大) EA2013-85 EMM2013-85 |
抄録 |
(和) |
Distributed Mode Loudspeaker(DML)は,英国のNew Transducers Limited(NXT社)により提案されているパネル型スピーカの実装方法のひとつであり,平板のダイアフラムを駆動素子(エキサイタ)が駆動し曲げ振動を起こすことによって音を放射する.
DMLが放射する音場をシミュレーションし,より理想的に設計するためにもDMLの振動解析は不可欠である.
本研究ではDMLを平板(薄板)としてモデル化し,板曲げ要素の有限要素法を適用することでその振動を解析した.
まず,著者らの先行研究で問題点であった振動板の支持条件(平板の曲げ振動の境界条件)を見直し,一方向の平行バネと二方向の回転バネを用いた新たな機械インピーダンスで近似する解析を試みた.
その結果,先行研究で得られた計算値より高次の共振周波数の振幅は抑えられたが実測値に近づくことはなかった.
次に,振動板の支持条件として平板の境界が三次元弾性体で支えられているという条件を採用し,平板の曲げ振動場と三次元弾性体の振動との振動連成解析を行った.
その結果,先行研究で得られた計算値より低次の共振周波数が上昇し,低域側の解析値が実測値に近づく結果が得られた.
さらに,DMLのエンクロージャ内部の音場を一様な音場であると仮定した,平板の曲げ振動場との音響振動連成解析を行った.
その結果,平板の曲げ振動場のみの解析結果に比べて低次の共振周波数のみがさらに上昇し,先行研究で得られた計算値よりも実測値に近づく結果が得られた. |
(英) |
The Distributed Mode Loudspeaker(DML) is one of panel speakers.The DML provides acoustic radiation by bending vibration of its plate generated by the applied force of its exciter.
The finite element method(FEM) for plate bending problems is employed to analyze the bending vibration of the plate of the DML.
In order to improve accuracy of prediction of measured results, alternative supported conditions of the plate of the DML are proposed: One is the boundary condition expressed by the mechanical impedance including one translational spring and two rotational springs; The other is the boundary supported by 3-dimensional elastic bodies.
Moreover, the internal sound field in the enclosure of the DML is regarded as a spatially uniform sound field, and then we construct FEM-based numerical methods for calculating the bending vibration of the plate of the DML with its internal sound field as a vibro-acoustic system.
We show that analysis results by the consequent numerical methods are approximate to measured results of a real DML. |
キーワード |
(和) |
DML / 板曲げ要素の有限要素法 / 三次元弾性体の有限要素法 / 内部音場 / / / / |
(英) |
DML / Finite element method for plate bending problems / Finite element method for 3-dimensional solid problems / Internal sound field / / / / |
文献情報 |
信学技報, vol. 113, no. 290, EA2013-85, pp. 101-105, 2013年11月. |
資料番号 |
EA2013-85 |
発行日 |
2013-11-07 (EA, EMM) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EA2013-85 EMM2013-85 |