講演抄録/キーワード |
講演名 |
2013-11-11 15:15
段差形状小型熱音響プライムムーバーの実用化に向けて ~ スタック位置がシステムに及ぼす影響の基礎検討 ~ ○川本 暁・坂本眞一・折野裕一郎・乾 義尚・池之上卓己(滋賀県立大)・渡辺好章(同志社大) US2013-57 |
抄録 |
(和) |
未利用熱の有効活用を目指す熱音響システムを研究している.熱音響現象により,熱から音へのエネルギー変換を実現でき,生成した音によって冷却や発電が可能となる.近年増加する電子機器の廃熱の回収に向け,熱音響システムの小型化が欠かせない.しかしながら,小型システムに対する報告は少なく,また,システムの設計手法も確立されていない.このため,システム形状が発振温度や管内音場に及ぼす影響の調査およびシステム設計手法の確立が急務である.本検討では,熱から音へのエネルギー変換に関わるスタックに着目し,その長さと設置位置が発振温度に及ぼす影響を検討した.また,設計手法の1つとして期待される安定性解析を用いて発振温度を求め,実験値との比較を行った. |
(英) |
As a recovery system of waste heat energy, thermoacoustic system based on thermoacoustic effect has been studied. For effectively use of waste heats of electronic equipment, it is necessary to miniaturize thermoacoustic system. However, there are a few studies on miniature thermoacoustic system and a designing method of miniature thermoacoustic system is not established. Examination of effects of system forms on onset temperature and sound field in system and establishment of designing method are urgently needed. In this report, effect of stack length and stack position on onset temperature of miniature thermoacoustic prime mover was examined. Experimental results were compared with onset temperature calculated with stability analysis, witch expected as a designing method of system. |
キーワード |
(和) |
熱音響システム / スタック / 安定性解析 / / / / / |
(英) |
thermoacoustic system / stack / stability analysis / / / / / |
文献情報 |
信学技報, vol. 113, no. 284, US2013-57, pp. 19-24, 2013年11月. |
資料番号 |
US2013-57 |
発行日 |
2013-11-04 (US) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
US2013-57 |