講演抄録/キーワード |
講演名 |
2013-04-12 11:30
コモンモードおよびノーマルモードのアンテナモデルを用いた全EMI放射の定量予測 ○渡辺哲史(岡山県工技センター)・若槻友里・豊田啓孝・五百旗頭健吾(岡山大) EMCJ2013-2 |
抄録 |
(和) |
空間中に存在する2導体線路に流れる電流はノーマルモードとコモンモードの成分に分離できることが知られている。我々はこれまでにプリント基板上の配線において線路の平衡度に着目してノーマルモード電圧から変換されるコモンモード電流・コモンモード放射の予測を行うアンテナモデルを構築してきた。実際のプリント基板構造からの放射はノーマルモード及びコモンモードの電流によって生じているため、ノーマルモードによる放射も加味して、全放射量の予測が可能であるか検討した。対象として、3種類の単純な基板構造に対して、ノーマルモードおよびコモンモードのアンテナモデルを構築し、数値解析によって求めた各モードの放射電界のベクトル和と元々の基板構造から生じる放射電界を比較し、これがほぼ一致することを確認した。 |
(英) |
The currents of two modes, normal mode and common mode flow along two-conductor lines placed in the air. We have so far developed the prediction method of common-mode current and radiation in a printed circuit board focusing on the imbalance of the transmission line. The difference of the imbalances causes the mode conversion, from normal mode to common mode. In this paper, it is examined that the vector sum of common-mode radiation and normal-mode radiation should be equal to total radiation. Each modal radiation is calculated separately with the corresponding equivalent model. The modeling method is applied to three kinds of printed-circuit-board structures. It is validated that the far electric field from the real-structure model agrees with the vector sum of far electric fields from normal-mode and common-mode equivalent models. |
キーワード |
(和) |
電磁放射妨害波 / プリント回路基板 / コモンモード / 予測 / モデル化 / / / |
(英) |
Electromagnetic interference / Printed circuit board / Common mode / Prediction / Modeling / / / |
文献情報 |
信学技報, vol. 113, no. 2, EMCJ2013-2, pp. 7-12, 2013年4月. |
資料番号 |
EMCJ2013-2 |
発行日 |
2013-04-05 (EMCJ) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMCJ2013-2 |