講演抄録/キーワード |
講演名 |
2013-01-23 10:10
管壁を部分的にオーバーラップさせたZ形状スロット導波管エッジシャントスロットアレーアンテナ ○渡辺 光・山口 聡・中本成洋・高橋 徹・小西善彦(三菱電機) AP2012-122 |
抄録 |
(和) |
導波管エッジシャントスロットアレーアンテナを導波管幅方向に複数列密着配置する場合,導波管の狭壁面に収まったコンパクトなスロットが必要である.従来,狭い導波管幅で共振スロットを構成する方法としてスロットをクランク形状にした例がある.しかしながらこの場合,クランク形状スロットではスロットのコンダクタンスを十分小さくすることができず,アレー化した際にスロットのみで整合を図ることが難しいといった課題があった.本稿では,導波管エッジシャントスロットアレーにおいてスロットをZ形状で構成し,スロット端部が導波管壁厚部にオーバーラップして配置することを特徴としたアンテナを提案する.提案するスロットは従来に比べてスロット単体の低コンダクタンス化が可能であり,低交差偏波化も実現できる.このため,アレー化した場合においても容易に整合可能かつ低交差偏波特性を得ることが可能となる.提案スロットの有効性を検証するために一例として片側6素子アレーに適用した結果,反射係数-10 dB以下の比帯域は従来構造に対して約4倍となった.また,交差偏波レベルを8.9 dB低減するといった効果も示した. |
(英) |
When the waveguide edge-shunt slot array is arrayed in the direction of waveguide width, compact slot which can be settled on the narrow wall of the waveguide is necessary. Crank shaped slot is a well known compact slot that can be settled on the narrow wall of the waveguide with its length be resonant. However, It cannot achieve sufficient small conductance. Because of this, it is difficult to match the slot to waveguide without matching circuit. In this paper, Z shaped slot partially overlapping the waveguides wall thickness is proposed. It can achieve sufficient small conductance and small cross polarization. As an example, 6-element array using the Z shaped slot is provided. As a result, the band width, which is defined by the reflection coefficient less than -10 dB, of proposed Z shaped slot have achieved 4 times wider than conventional slot. In addition, the cross polarization can be reduced by -8.9 dB. |
キーワード |
(和) |
導波管 / エッジシャントスロットアレー / 共振スロット / 帯域幅 / 整合 / 交差偏波 / / |
(英) |
Waveguide / Edge Shunt Slot Array / Resonant Slot / Band Width / Impedance Matching / Cross Polarization / / |
文献情報 |
信学技報, vol. 112, no. 384, AP2012-122, pp. 1-6, 2013年1月. |
資料番号 |
AP2012-122 |
発行日 |
2013-01-16 (AP) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
AP2012-122 |