講演抄録/キーワード |
講演名 |
2012-12-21 16:45
オンチップ光回路のためのBCB貼り付けを用いたSi基板上InP薄膜受動素子の特性 ○李 智恩・山原佳晃・渥美裕樹・西山伸彦・荒井滋久(東工大) OPE2012-141 エレソ技報アーカイブへのリンク:OPE2012-141 |
抄録 |
(和) |
Si-LSI上InP系薄膜光集積回路の実現のために、その基本要素である細線導波路とそれを利用した受動素子の設計と作製法の検討を行った。BCB(Benzocyclobutene) を介してSi基板上に形成したGaInAsP薄膜に、電子線描画法とドライエッチングで作製したGaInAsP細線導波路の側壁粗さと伝搬損失の関係を明らかにし、低損失化技術の検証を行った。その結果、Si基板上化合物細線導波路において最小値となる4 dB/cmの伝搬損失を達成した。次に、この作製法を用いて、光信号を2分岐する多モード干渉導波路の構造設計・作製を行い、c-band内で平均挿入損失3dB を得た。また、レーザと細線導波路間のモード分布の不一致による結合損失を計算し、各素子間にテーパ型モード変換器を挿入することにより結合効率を99%に向上する集積素子の構造設計を行った。 |
(英) |
For InP-based membrane photonic circuits on Si-LSI, a GaInAsP wire waveguide and basic functional passive devices based on the GaInAsP wire structure were designed, fabricated, and characterized. The relationship between the sidewall roughness and the propagation loss was clarified and the technic for loss reduction was verified by improved fabrication process of GaInAsP waveguide with an electron-beam lithography and inductively-coupled-plasma reactive ion etching on Si substrate by BCB bonding. As a result, the propagation loss was obtained as low as 4 dB/cm which is the best record as an InP-based wire waveguide on Si substrate. Also a multi-mode interferometer (MMI) as a 3dB optical beam splitter was designed and fabricated with wire waveguide. In addition, for membrane PICs the coupling losses were calculated between membrane laser and GaInAsP wire waveguide caused by deference of optical mode fields, and the taper-type optical mode converter was designed to improve the coupling efficiency to 99% between those devices. |
キーワード |
(和) |
薄膜光集積回路 / BCB貼り付け法 / GaInAsP細線導波路 / MMI カプラ / モード変換器 / / / |
(英) |
Membrane photonic circuits / BCB adhesive wafer bonding / GaInAsP wire waveguide / MMI splitter / Optical mode converter / / / |
文献情報 |
信学技報, vol. 112, no. 371, OPE2012-141, pp. 39-44, 2012年12月. |
資料番号 |
OPE2012-141 |
発行日 |
2012-12-14 (OPE) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OPE2012-141 エレソ技報アーカイブへのリンク:OPE2012-141 |