講演抄録/キーワード |
講演名 |
2012-12-14 11:15
空洞共振器法に適した誘電体基板評価用55GHz空洞共振器の開発 ○清水隆志(宇都宮大)・川原祐紀・赤坂清三(川島製作所)・古神義則(宇都宮大) MW2012-137 エレソ技報アーカイブへのリンク:MW2012-137 |
抄録 |
(和) |
マイクロ波帯における低損失誘電体平板材料の面方向の複素誘電率測定法である空洞共振器法は、JIS規格やIEC規格にて標準化され、広く用いられている。しかしながら、規格化された共振器寸法をV帯以上に適用し、市販の1.2mm同軸線路を用いた場合、励振孔寸法が共振器に対して大きくなりすぎ、共振電磁界に及ぼす影響が大きくなる。このため、同測定法のV帯以上への適応は、これまで困難とされていた。本研究では、共振器寸法や励振孔に関する検討を行い、空洞共振器法に適した誘電体基板評価用55GHz空洞共振器を開発した。さらに、試作した共振器を用いて、PTFE平板の複素誘電率測定を行い、その有効性を実証した。 |
(英) |
The cavity resonator method, which has standardized in the JIS standard and the IEC standard, is one of measuring method for the complex permittivity in the horizontal direction of dielectric substrate in microwave region. However, in V band, its excitation holes are too big, compared as the standardized cavity dimensions. Therefore, it is difficult to apply this method in V band or more, because the resonant electromagnetic field is affected significantly by the excitation holes. In this paper, 55GHz cavity resonator suitable for cavity resonator method was developed in considering the effect of the excitation holes. Moreover, the complex permittivities of a PTFE plate were measured using fabricated two cavity resonators. As a result, it is verified the developed cavity resonator is useful for the cavity resonator method. |
キーワード |
(和) |
空洞共振器法 / 複素誘電率 / 低損失誘電体材料 / ミリ波 / / / / |
(英) |
Cavity resonator method / Complex permittivity / Low-loss dielectric materials / Millimeter-wave / / / / |
文献情報 |
信学技報, vol. 112, no. 355, MW2012-137, pp. 61-66, 2012年12月. |
資料番号 |
MW2012-137 |
発行日 |
2012-12-06 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2012-137 エレソ技報アーカイブへのリンク:MW2012-137 |