講演抄録/キーワード |
講演名 |
2012-10-25 13:10
放射損失を考慮したマイクロストリップ線路とスロット間の結合解析 ○戸花照雄・笹森崇行・礒田陽次(秋田県立大) EMCJ2012-68 EST2012-52 エレソ技報アーカイブへのリンク:EST2012-52 |
抄録 |
(和) |
近年,プリント基板上に線路や素子を高密度で実装するために,グラウンドにビアホールや切れ込みなどが多数存在してスロットを形成することとなりその影響が懸念されている.本報告ではマイクロストリップ線路とグラウンド上の幅の狭いスロット
との結合を多導体伝送線路理論を用いて解析する場合に,スロット線路からの放射電力から自己コンダクタンスを求め,それを用いることで放射損失を考慮する方法について示す.そして,損失を考慮した多線条伝送線路理論による解析結果とFDTD法による結果と比較しおおむね一致することからその妥当性を示した. |
(英) |
By advance of miniaturization of electronic devices, a ground of a printed circuit board is tend to be small and complicated and the ground may have some defects, such as connectors or clearance halls of vias. In this paper, in order to consider radiation loss we show the method using the per-unit-length self conductance derived by radiation power from a slot line when the coupling between a microstrip line and a slot in a ground on a PCB using the MTL method is analyzed. And, we show that the proposed method is validated by comparing results by the MTL method with results by the FDTD method. |
キーワード |
(和) |
プリント基板 / 電磁結合 / 多線条伝送線路理論 / グラウンドのスロット / 放射損失 / / / |
(英) |
PCB / coupling / multiconductor-transmission-line / ground slot / radiation loss / / / |
文献情報 |
信学技報, vol. 112, no. 256, EMCJ2012-68, pp. 27-30, 2012年10月. |
資料番号 |
EMCJ2012-68 |
発行日 |
2012-10-18 (EMCJ, EST) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMCJ2012-68 EST2012-52 エレソ技報アーカイブへのリンク:EST2012-52 |