講演抄録/キーワード |
講演名 |
2012-10-17 16:40
静電塗布法を用いたフラーレン誘導体薄膜の成膜 ○高木健次・武志一正・福田武司(埼玉大/理研)・鎌田憲彦(埼玉大)・朱 正明・山形 豊(理研)・田島右副(理研/埼玉大) OME2012-54 エレソ技報アーカイブへのリンク:OME2012-54 |
抄録 |
(和) |
ウェットプロセスでp-nもしくはp-i-n積層型有機薄膜太陽電池を形成する為には、p型とn型の有機材料を溶解する溶媒を選択する必要があり、有機層の積層化が困難である。本研究では、静電塗布法に適した有機薄膜太陽電池のn型材料を検討するために、異なる7種類のフラーレン誘導体薄膜を成膜し、膜の表面形状・粗さを評価した。その結果、溶媒に対する溶解度が高く凝集性が低いIndene-C60-bisadduct (ICBA)薄膜で最も平坦な膜になり、表面粗さ0.57 nmを実現した。また、印加電圧を変化させた時の噴霧直径を測定した結果、フラーレン誘導体の双極子モーメントに比例して広がる傾向があった。以上の結果から、静電塗布法で成膜するフラーレン誘導体薄膜の表面粗さ、噴霧直径は材料に依存することが分かった。 |
(英) |
A solubility of n- and p-type organic materials against organic solvent is necessary to realize a multilayer organic photovoltaic cell (OPV),like p-n and p-i-n structures. In this study, we investigated the surface morphology of fullerene derivative film fabricated by electrospray deposition technique. As a result, the ICBA thin film became the flattest, and realized the RMS roughness of 0.57 nm. In addition, we found that the spray diameter expanded with increasing the dipole moment of fullerene derivative material. This showed that the surface roughness and spray diameter of the fullerene derivatives were dependent on molecular structure of fullerene derivative. |
キーワード |
(和) |
静電塗布法 / 薄膜 / 表面粗さ / フラーレン誘導体 / 噴霧直径 / / / |
(英) |
Electrospray Deposition Method / Thin Film / Surface roughness / Fullerene derivative / spray diameter / / / |
文献情報 |
信学技報, vol. 112, no. 244, OME2012-54, pp. 45-48, 2012年10月. |
資料番号 |
OME2012-54 |
発行日 |
2012-10-10 (OME) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OME2012-54 エレソ技報アーカイブへのリンク:OME2012-54 |