講演抄録/キーワード |
講演名 |
2012-03-02 16:45
小電力供給用金メッキスリップリングシステムの特性に及ぼす潤滑油補給の影響 ○須川満博・小川将太・北島英毅・澤 孝一郎・上野貴博(日本工大) EMD2011-141 エレソ技報アーカイブへのリンク:EMD2011-141 |
抄録 |
(和) |
著者らは、これまで金メッキスリップリングとAg-Pdブラシシステムの劣化過程について調べてきた。その結果、潤滑油を塗布した場合、寿命は延びるが、その寿命は1000時間程度から7000時間の範囲で大きく変動することが分かった。過去の実験では、潤滑油を約900時間ごとに給油し、実験を行なった。その結果定期的に塗布した場合、8000時間を超える寿命が実現できた。長寿命が実現できた理由として、潤滑油は、摩耗を減少させるだけでなく、Ni層の酸化も抑制する効果があるためと推測され、摺動面の劣化モデルを提案した。そして、今回の実験では1000時間ごとに給油する方法をとり、実験を行った。その結果、全体を通して安定した接触電圧を示し、2500時間経過後から徐々に接触電圧が上昇してくことが確認された。また、潤滑油補給後では接触電圧が減少することが確認できた。このことから、潤滑油は長寿命化を実現するのに有効な方法であるということが言える。 |
(英) |
The authors have been investigating degradation process of Au plated slip ring and Ag-Pd brush system. However, even with lubricant the lifetime was varied from about 1000 hours to almost 7000 hours in the past experiments. In these tests the lubricant was supplied only once before the test. In the previous test the lubricant was regularly supplied almost every 900 operation hours, and-the operation more than 8000 hours was realized. The reason of long operation is guessed to be that the lubricant not only decreases wear but also suppresses oxidation of the Ni layer. In this test the lubricant is supplied almost every 1000 hours and the operation time is presently over 3500 hours. The contact resistance is still stable, but gradually increasing after 2500 hours. In addition the width of voltage fluctuation is found to be smaller just after the supply of the lubricant. |
キーワード |
(和) |
スリップリング / 金メッキ / ニッケル下地メッキ / Ag-Pdブラシ / 寿命 / 潤滑油 / 酸化 / |
(英) |
Slip ring / Au plating / Ni base plating / Ag-Pd brush / Lifetime / Lubricant Oxidation / / |
文献情報 |
信学技報, vol. 111, no. 460, EMD2011-141, pp. 61-64, 2012年3月. |
資料番号 |
EMD2011-141 |
発行日 |
2012-02-24 (EMD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMD2011-141 エレソ技報アーカイブへのリンク:EMD2011-141 |