講演抄録/キーワード |
講演名 |
2012-01-27 14:45
鋼床版亀裂の超音波探傷における入射角調整に関する検討 ○木村友則(三菱電機)・小池光裕・和高修三(菱電湘南エレクトロニクス)・高橋 実・村越 潤(土木研) US2011-101 |
抄録 |
(和) |
鋼床版に発生した亀裂を非破壊で検出する超音波探傷法について示す。この探傷法は、試験体の探傷面に対してほぼ平行に横波の超音波ビームを伝搬させる方式であり、ビームの入射角に対する感度変化が大きい。このため、入射角調整が重要である。本文では、この入射角調整法について検討したものである。まずSVC透過パルスを用いた入射角調整法を示し、その有効性をシミュレーションによって検証した。入射角を僅かに変えながらSVC透過パルスがピークを示す角度を求めたところ、試験体音速に依らず屈折角は概略90°となることが分かった。したがって、SVC透過パルスによる入射角調整法の有効性が確認できた。 |
(英) |
An ultrasonic testing method to detect fatigue cracks in orthotropic steel deck is shown. In this method, shear waves propagating for critical angle are used, and adjustment of the incident angle is important since it is very sensitive to the refraction angle which effects on the testing results considerably. In this paper, adjustment technique of the incident angle using the amplitude of shear wave propagating along the surface of the test object is shown, and the validity of the technique is discussed by simulation. The amplitude of shear wave is calculated varying the incident angle. As a result, the incident angle when the amplitude becomes peak depends on the velocity of the test object. However, the refraction angle corresponding to the incident angle are almost constant, about 90 degrees. Therefore, the validity of the technique is verified. |
キーワード |
(和) |
鋼床版 / 超音波探傷 / シミュレーション / 入射角 / / / / |
(英) |
Orthotropic Steel Deck / Ultrasonic Testing / Simulation / Incident Angle / / / / |
文献情報 |
信学技報, vol. 111, no. 401, US2011-101, pp. 93-96, 2012年1月. |
資料番号 |
US2011-101 |
発行日 |
2012-01-19 (US) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
US2011-101 |