講演抄録/キーワード |
講演名 |
2012-01-20 15:25
ジュール熱を利用したアニール法による有機薄膜太陽電池の最適化 ○内藤憲樹・森 竜雄(名大) OME2011-77 エレソ技報アーカイブへのリンク:OME2011-77 |
抄録 |
(和) |
P3HTとPCBMを用いた素子では変換効率を上げるために、アニールが必要である。一般的には、基板はアニールにはホットプレートが利用される。この方法では、基板のサイズはホットプレートの大きさに制限される。そこで、ITOに電流を流すことでジュール熱を発生させ、アニールをする方法を検討した。この方法では装置の大きさが基板のサイズによらない。ジュール熱を利用して、ホットプレートを利用したアニールと同様の冷却過程を再現することができた。ジュール熱によるアニールとホットプレートを利用したアニール比較し、同等の変換効率を得ることができた。 |
(英) |
It is well-known that the bulk-hetero-type photovoltaic cells consisting of Poly(3-hexylthiophene-2,5-diyl) (P3HT) and (6,6)-phenyl-C61 butyric acid methyl ester (PCBM) need to anneal for increasing power conversion efficiency (PCE). Usually the annealing is carried out in laboratories by putting on a hot plate. In this method the substrate size is limited by the size of hotplate. Therefore, we propose the new anneal method based on Joule heating of transparent electrode, indium-tin-oxide (ITO). In this method, the substrate size is not limited by the size of devices for annealing. The Joule heating method realizes the similar rising and cooling process of the hotplate annealing. We compare performance the device Joule heating with that using a hot plate. The devices using Joule heating method have the same PCE of the devices using hotplate. |
キーワード |
(和) |
有機薄膜太陽電池 / アニールの効果 / アニール方法 / P3HT / / / / |
(英) |
organic photovoltaic cell / annealing effect / annealing method / P3HT / / / / |
文献情報 |
信学技報, vol. 111, no. 392, OME2011-77, pp. 45-49, 2012年1月. |
資料番号 |
OME2011-77 |
発行日 |
2012-01-13 (OME) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OME2011-77 エレソ技報アーカイブへのリンク:OME2011-77 |