講演抄録/キーワード |
講演名 |
2011-12-16 10:45
分配ユニット間のアイソレーションが高い進行波型電力分配/合成器 ○川西裕士・佐薙 稔・藤森和博・野木茂次(岡山大) MW2011-135 エレソ技報アーカイブへのリンク:MW2011-135 |
抄録 |
(和) |
高出力電力増幅器に適した進行波型電力分配/合成器について検討した.分配/合成器は分配/合成ユニットを縦続接続することで構成されている.分配ユニットは矩形導波管に挿入された同軸プローブ対と短い絞り部から成る.等価回路に基づいたユニットの設計では,個々の等価回路素子のアドミタンスの周波数特性を考慮し,異なるユニットにある分岐同軸ポート間のアイソレーションを最大にするようにユニット間の接続導波管長を最適化した.X帯で動作するように設計された8分配/合成器では,分配比のばらつきが±m0.5dB以内となる帯域幅が3.3GHz,反射が-20dB以下となる帯域5.7GHz以上得られ,分岐ポート間のアイソレーションは18dBとなった. |
(英) |
Traveling-wave power divider/combiner's adequate for high power amplifying systems have been investigated. Multiple dividing/combiring units are successively connected in the divider/combiner. The unit consists of a rectangular waveguide section with a coaxial probe pair and a thin narrow section. In design of the units based on their equivalent circuit, frequency dependency of the admittance of individual elements in the equivalent circuit was taken into account. In addition, the length of the waveguide between the adjacent units was optimized in order to maximize isolation among the coaxial branch ports in the different units. Bandwidth for dividing power ratios deviation less than plus minus 0.5dB was 3.3GHz, and that for -20dB return loss was wider than 5.7GHz for the designed eight-way divider operated in X-band. Furthermore, the isolation of 18dB among the branch ports was achieved. |
キーワード |
(和) |
マイクロ波 / 電力分配/合成器 / 矩形導波管 / 同軸プローブ / アイソレーション / / / |
(英) |
microwave / power divider/combiner / rectangular waveguide / coaxial probe / isolation / / / |
文献情報 |
信学技報, vol. 111, no. 351, MW2011-135, pp. 53-58, 2011年12月. |
資料番号 |
MW2011-135 |
発行日 |
2011-12-08 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2011-135 エレソ技報アーカイブへのリンク:MW2011-135 |