講演抄録/キーワード |
講演名 |
2011-11-18 15:55
Electrode Mass Change of AgNi Contacts for Electromagnetic Contactor
-- Influence of Voltage when only Break Arc is Generated -- ○Kiyoshi Yoshida・Koichiro Sawa(Nippon Inst. of Tech.)・Kenji Suzuki・Masaaki Watanabe・Hideki Daijima(Fuji Electric) EMD2011-101 エレソ技報アーカイブへのリンク:EMD2011-101 |
抄録 |
(和) |
電源電圧がアーク継続時間、接触抵抗、アークエネルギー、および電極質量の変化量(消耗,転移)に与える影響について実験した。過去の報告では、開離時と閉成時の両方にアークを発生させたが、本報告では開離時のみにアークを発生させた実験を行った。実験条件は同一で、電源電圧は100V~160Vの間で変化させ、負荷電流は5Aとして、10万回までの連続開閉を行った。その結果、開離時アークのみを発生させた場合、接触抵抗の平均値は電圧の影響を受けずほぼ一定で、閉成時アークが発生する場合より大きくなった。開離時アークの継続時間は、以前とほぼ同じであった。以前の閉成時と開離時のアークが発生する実験では、固定電極の陰極消耗量が積算アークエネルギーに比例した。開離時アークのみの今回の実験でも、固定陰極消耗量はアークエネルギーに比例することが分かった。 |
(英) |
Tests at several source voltages were carried out to clarify the influence of the voltage on various characteristics, arc duration, contact resistance, arc energy, and electrode mass change. In previous experiments, arc was generated in both make and break. In this report, arc is generated only at break. The source voltages are changed from 100V to 160V, load current is set to 5A constant, and an electromagnetic contactor is operated continuously up to 100,000 times. As a result, when only break arc occurs, the source voltage doesn't influence average contact resistance and arc duration is almost same as a past result. In addition, cathode loss of fixed electrode was proportional to total arc energy in the previous experiment. Also, in this experiment that only break arc generated, the cathode loss was proportional to total arc energy. |
キーワード |
(和) |
電磁コンタクタ / 電気接点 / アーク継続時間 / アークエネルギー / 電極消耗 / AgNi合金 / / |
(英) |
Electromagnetic contactor / Electrical contact / Arc duration / AgNi contact / Arc energy / Electrode mass change / / |
文献情報 |
信学技報, vol. 111, no. 299, EMD2011-101, pp. 185-188, 2011年11月. |
資料番号 |
EMD2011-101 |
発行日 |
2011-11-10 (EMD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMD2011-101 エレソ技報アーカイブへのリンク:EMD2011-101 |