講演抄録/キーワード |
講演名 |
2011-08-25 13:15
ファブリ・ペロー干渉計の原理を利用した光ファイバ端面の検査技術 ○渡辺 汎・木原 満・田中正徳・豊永雅信(NTT東日本) OFT2011-16 |
抄録 |
(和) |
ファブリ・ペロー干渉計の原理を用いた新しい光ファイバ端面検査技術を提案する。検査対象のファイバ端面に平滑な計測用ファイバ端面を近接させて、2波長で反射減衰量を測定し、その値が14.7dBに等しいか否かで、ファイバ端面がカット不良端面であるか正常端面かの判定を行う。また、提案した検査技術を実現する端面検査システムについて提示し、そのシステムで使用する新たなファイバステージについても言及する。更に正常端面と複数のカット不良端面を作成し、端面検査システムで評価した結果を示す。その結果、この端面検査システムによりカット不良端面もしくは正常端面を正しく判定することが可能であった。 |
(英) |
We propose an inspection technique for cleaved optical fiber ends based on the Fabry-Perot interferometer. An inspected fiber end is determined as uneven or flat depending on whether both the measured return losses from the fiber end at two wavelengths are equal to ~14.7 dB. We also developed a system that uses this technique for inspecting cleaved fiber ends. We discuss several requirements for the fiber stage where two optical fiber ends are set to create a Fabry-Perot interferometer. We fabricated a prototype of a fiber stage for outside usage based on these requirements. The images of the inspected flat and uneven fiber ends obtained experimentally with our proposed inspection system with the fabricated fiber stage were in good agreement with those obtained using a scanning electron microscope (SEM). Thus, the proposed technique enables cost-effective and easy inspection of cleaved optical fiber ends. |
キーワード |
(和) |
光ファイバ接続 / ファブリ・ペロー干渉計 / 反射減衰量 / ファイバカット面 / / / / |
(英) |
optical fiber connecting / Fabry-Perot interferometer / return loss / cleaved fiber end / / / / |
文献情報 |
信学技報, vol. 111, no. 182, OFT2011-16, pp. 1-6, 2011年8月. |
資料番号 |
OFT2011-16 |
発行日 |
2011-08-18 (OFT) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OFT2011-16 |