講演抄録/キーワード |
講演名 |
2011-07-14 09:05
時間変動を考慮した伝導ノイズのシミュレーション ○廣瀬健二・米田 諭・宮崎千春・岡 尚人・三須幸一郎(三菱電機) EMCJ2011-44 |
抄録 |
(和) |
スイッチング素子を利用した電力変換回路は,大電力を高速にスイッチングすることによりノイズを発生させる.製品を市場に出荷するためには,規格で定められた測定法を用いて製品の伝導ノイズを測定し,測定結果が許容値内である必要がある.
本稿では,CISPR(国際無線障害特別委員会)規格に準拠した測定法を計算機シミュレーション上で実現し,伝導ノイズ特性を把握する手法の検討結果について報告する.まず,スイッチング回路を含む電力変換回路を対象に,伝導ノイズのシミュレーションを行う等価回路モデルを作成し,伝導ノイズの時間波形を求めた.そして,得られた時間波形から周波数成分の時間変動を計算し,QP(Quasi-Peak:準尖頭値)検波器の動作を模擬した数値計算を行うことで,許容値と比較可能なQP検波値を得た. |
(英) |
A large amount of conductive noise often becomes a problem in switching power converters, because high electric power is switched in high frequency. Generally, the conductive noise of products has to be measured by specified standards, and has to be under the limit values defined in the standard.
In this paper, a simulation method of estimating conductive noise based on CISPR standards is reported. First, time waveform and its frequency components of a switching power converter are calculated from equivalent circuit simulation. Then, the time variability of the frequency components are calculated, and finally, the Quasi-Peak (QP) values are obtained by applying a numerical calculation of QP detector circuit response. |
キーワード |
(和) |
EMC / 伝導ノイズ / シミュレーション / QP検波 / スイッチング電源 / 時間変動 / / |
(英) |
EMC / Conductive Noise / Simulation / Quasi-Peak detection / Switching power supply / Time variability / / |
文献情報 |
信学技報, vol. 111, no. 131, EMCJ2011-44, pp. 1-5, 2011年7月. |
資料番号 |
EMCJ2011-44 |
発行日 |
2011-07-07 (EMCJ) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMCJ2011-44 |