講演抄録/キーワード |
講演名 |
2010-10-26 10:20
真空トランジスタのコレクタ形状とコレクタ特性 ○後藤康仁・池田啓太・大上 航・辻 博司(京大) ED2010-138 エレソ技報アーカイブへのリンク:ED2010-138 |
抄録 |
(和) |
電界放出微小電子源を用いた真空トランジスタにおけるコレクタの形状と、それがコレクタ特性に及ぼす影響を計算機実験により調べた。真空トランジスタは、ゲートつきの電界放出微小電子源にコレクタを付加した三極素子とし、電子源のゲート開口は全体に対して十分小さいものと仮定した。デバイス内の電子ビームの軌道は、まず差分法によりデバイス内の電位を計算し、その後、オイラー法ないしはルンゲクッタ法による運動方程式の積分により求めた。コレクタ形状を平面ではなく、曲面とすることでコレクタ特性の肩特性が改善されることが明らかとなった。 |
(英) |
Relationship between collector geometry and collector characteristics was studied by numerical simulation. The evaluated vacuum transistor consisted of a gated field emitter array and an exteranal collector. The size of aperture was assumed to be sufficiently small as compared to the device size. Electron beam trajectories were calculated in the following manner. Calculation of electric potential distribution was performed by finite difference method. Integration of equation of motion was performed either by Euler scheme or Runge-Kutta scheme. It was found that the knee characteristics were improved with curved collector as comapred to the flat collector. |
キーワード |
(和) |
真空トランジスタ / 電界放出電子源 / ビーム発散角 / コレクタ形状 / コレクタ特性 / 肩特性 / / |
(英) |
vacuum transistor / field emitter array / beam divergence / collector geometry / collector characteristics / knee characteristics / / |
文献情報 |
信学技報, vol. 110, no. 249, ED2010-138, pp. 51-54, 2010年10月. |
資料番号 |
ED2010-138 |
発行日 |
2010-10-18 (ED) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
ED2010-138 エレソ技報アーカイブへのリンク:ED2010-138 |