講演抄録/キーワード |
講演名 |
2010-10-22 13:50
静電塗布法を利用した太陽電池用有機材料の平坦化技術 ○浅野 俊・高木健次・福田武司(埼玉大/理研)・朱 正明(理研)・本多善太郎・鎌田憲彦(埼玉大)・田島右副・青山哲也(埼玉大/理研)・山形 豊(理研) OME2010-48 エレソ技報アーカイブへのリンク:OME2010-48 |
抄録 |
(和) |
ウェットプロセスでバルクヘテロジャンクション型有機太陽電池を形成する為には、p型とn型の両材料を溶解する溶媒を選択する必要があり、積層化を行うのは困難である。この問題に対して、ウェットプロセスで積層化が容易な静電塗布法を用いて、バルクヘテロジャンクション層を塗布する研究を行った。本報告ではp型(P3HT)とn型材料(PCBM)の混合溶液を静電塗布し、薄膜中の混合比率と表面構造を評価した。その結果、静電塗布法で成膜した薄膜中の混合比率は塗布前の溶液と同程度である事が明らかとなった。また、蒸気圧の低い溶媒と誘電率の高い溶媒を用いて静電塗布を行う事で、成膜した薄膜表面の平坦化を実現した。 |
(英) |
To realize bulk-heterojunction structure in an organic photovoltaic cell, the solubility for n-type and p-type organic materials is necessary. As a result, the multilayer structure is difficult for the bulk-heterojunction structure. We investigated an electrospray deposition technique to improve the device performance of the organic photovoltaic cell. In this study, we estimated the concentration and the surface morphology of the organic thin film fabricated by the electrospray deposition method. We found that the concentration of the organic thin film was almost same as the organic solution. In addition, the low vapor pressure and the high dielectric constant of the organic solvent is important factor to improve the surface roughness. |
キーワード |
(和) |
静電塗布法 / 有機材料薄膜 / 平坦化 / 太陽電池 / 有機薄膜太陽電池 / / / |
(英) |
Electrospray Deposition / Organic Material / Thin Film / Surface Roughness / Organic Photovoltaic Cell / / / |
文献情報 |
信学技報, vol. 110, no. 243, OME2010-48, pp. 11-14, 2010年10月. |
資料番号 |
OME2010-48 |
発行日 |
2010-10-15 (OME) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OME2010-48 エレソ技報アーカイブへのリンク:OME2010-48 |