講演抄録/キーワード |
講演名 |
2010-05-27 13:00
自己組織化膜形成による酸化金属電極の表面修飾 金 性湖・梅本祐也・大塚華恵・田中邦明・○臼井博明(東京農工大) OME2010-17 エレソ技報アーカイブへのリンク:OME2010-17 |
抄録 |
(和) |
有機デバイスの電極として一般的に用いられるITOと有機薄膜の界面特性を制御する目的で,ITO表面に自己組織化膜(SAM)を形成し,その表面物性を修飾することを試みた.その一つは末端にアゾ基を持つSAM膜の形成であり,SAM膜を重合開始剤として利用することで,その表面に蒸着したモノマー薄膜のモルフォロジーを制御することが可能となった.いまひとつの手法はITO表面に酸化金属蒸着膜を形成する方法である.ITO表面にWOx膜を製膜することできわめて大きな仕事関数の表面が得られた.さらにその表面にSAMを形成することで,表面自由エネルギーの最適化が可能となった. |
(英) |
Self-assembled monolayers (SAMs) were prepared on the surface of ITO, which is one of the most commonly used electrode for organic electronics devices, with a purpose to modify its surface to control the interface between the organic layer and the substrate. One of the methods was to prepare a SAM that has an azo end group, which can be utilized as polymerization initiator. This method was effective in controlling the morphology of monomer films that were deposited on its surface. The other method was to prepare a metal oxide film on the surface of ITO. Vapor deposition of WO3 was effective in increasing the work function of the substrate. The surface free energy of the WO3 was then adjusted by forming SAM layers on its surface. |
キーワード |
(和) |
界面制御 / 自己組織化膜 / ITO / 酸化タングステン / 表面開始蒸着重合 / / / |
(英) |
interface control / self-assembled monolayer / ITO / tungsten oxide / surface-initiated deposition polymerization / / / |
文献情報 |
信学技報, vol. 110, no. 59, OME2010-17, pp. 1-6, 2010年5月. |
資料番号 |
OME2010-17 |
発行日 |
2010-05-20 (OME) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OME2010-17 エレソ技報アーカイブへのリンク:OME2010-17 |