講演抄録/キーワード |
講演名 |
2010-05-14 11:50
低損失化な機械的に分配比可変の導波管型電力分配器 ○佐薙 稔・小路宗博・野木茂次(岡山大)・浜本研一・丹羽直幹・高木賢二(鹿島建設) MW2010-25 エレソ技報アーカイブへのリンク:MW2010-25 |
抄録 |
(和) |
機械的に分配比を可変できる電力分配器の挿入損失の削減について検討した.電力分配器は矩形導波管から同軸線路へマイクロ波を取り出すために,矩形導波管中に同軸プローブを挿入した構成で,電力分配比を機械的に可変するために3枚の回転フィンと1本の導体棒を持つ.大電力実験と電磁界シミュレーションにより,回転フィンの側面と導波管のH面管壁の向かい合っている部分に流れる大きな電流による導体損が損失の原因であることを明らかにした.その大きな電流量を削減するために"H"字形の回転フィンを採用した.試作した分配器の挿入損失は6.5%以下であることを確認した. |
(英) |
Loss reduction of a power divider mechanical-controlling dividing ratio has been investigated. The divider consists of a rectangular waveguide section with a coaxial probe in order to deliver microwave power from the waveguide to the coaxial line, and three rotary fins and one metal rod are incorporated for mechanical-control of the dividing ratio. High power experiments and electromagnetic field simulations revealed to be that the cause of high insertion loss of the divider is the conductor loss by large current flowing on surfaces of the fin edges and the H plane waveguide walls facing each other. The rotary fins with the shape of character ``H'' are employed for reduction of the large current. It was confirmed that the power insertion loss ratio of the prototype divider is less than 6.5%. |
キーワード |
(和) |
マイクロ波 / 電力分配器 / 可変電力分配器 / 同軸プローブ / 導体損 / / / |
(英) |
microwave / power divider / variable power divider / coaxial probe / conductor loss / / / |
文献情報 |
信学技報, vol. 110, no. 25, MW2010-25, pp. 59-64, 2010年5月. |
資料番号 |
MW2010-25 |
発行日 |
2010-05-06 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2010-25 エレソ技報アーカイブへのリンク:MW2010-25 |