講演抄録/キーワード |
講演名 |
2009-11-20 13:30
楔形用電波吸収体設計に関する理論的検討 ○北川真也・畑 貴將・喜田達夫(防衛省) EMCJ2009-82 |
抄録 |
(和) |
通常の電波吸収体の設計では,無限に大きい平板に対して伝送線路理論を用いて反射率を計算し,得られた結果から誘電率,透磁率及び厚さを決める.しかし,平板以外の形状に対する電波吸収体の設計では,伝送線路理論を用いた反射率を計算することができない.本報告では,平板以外の形状の一例として,楔形からのエッジ散乱波を抑圧する電波吸収体を設計するため,電波吸収体を表面インピーダンスで表した回折係数によりエッジ散乱波の電界を計算し,楔の開き角と表面インピーダンスの関係から,各周波数において所望の反射率を得るための誘電率の条件を導出した.本結果から、平板用電波吸収体と楔形用電波吸収体の誘電率の条件が異なり,TE 波の場合は誘電率の虚部を低く,TM 波の場合は誘電率の実部・虚部ともに高くする必要があることが判明した. |
(英) |
In the general design of Radar Absorbent Material (RAM), its reflection coefficient is calculated with the transmission line theory applied to an infinite plate, and then its permittivity, permeability, and thickness are determined.
However, for other objects besides a plate, it is impossible to calculate their reflection coefficient using the transmission line theory. In this report, we calculate the electric fields scattered by the edge coated with the surface impedance and derive the conditions of permittivity to obtain the desired reflection coefficient with the relation between the edge angle and surface impedance. Consequently, we find the fact that the conditions of RAM’s permittivity for a plate and a wedge shape are different from each other and it is necessary to decrease imaginary part of the permittivity for TE wave and increase real part and imaginary part of the permittivity for TM wave. |
キーワード |
(和) |
電波吸収体 / エッジ回折 / 表面インピーダンス / / / / / |
(英) |
radar absorbent material / edge diffraction / surface impedance / / / / / |
文献情報 |
信学技報, vol. 109, no. 295, EMCJ2009-82, pp. 19-24, 2009年11月. |
資料番号 |
EMCJ2009-82 |
発行日 |
2009-11-13 (EMCJ) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMCJ2009-82 |