講演抄録/キーワード |
講演名 |
2009-09-17 15:40
電力を再構成可能なFlex Power FPGAチップの設計と試作 ○日置雅和(産総研)・河並 崇(金沢工大)・松本洋平(産総研)・堤 利幸(明大)・中川 格・関川敏弘・小池帆平(産総研) RECONF2009-25 |
抄録 |
(和) |
我々の研究グループは,ソフトウェアとハードウェアの観点から,電力を再構成可能なFPGA である“Flex Power FPGA”の予備的評価を行ってきた.今回,我々はFPGA としての回路再構成機能に加えて,電力再構成機能を有するFlex Power FPGA チップの設計と試作を90nm CMOS 技術で行った.また,デバイス設計と同時に,Flex Power FPGA のための専用ソフトウェアを開発した.専用ソフトウェアを用いて16 ビットカウンタ回路のビットストリームを生成しチップへ実装した.その結果,設計したチップ上で16 ビットカウンタの完全動作を確認した. |
(英) |
Our research group has evaluated “Flex Power FPGA” which can reconfigure the power from the viewpoint of software and hardware. This paper describes the Flex Power FPGA chip with power reconfigurability in addition to circuit reconfigurability is design and fabricated in 90nm CMOS technology. Moreover the dedicated software for Flex Power FPGA is developed. The bit stream of 16 bit counter circuit is generated by dedicated software and it was implemented on the Flex Power FPGA chip. As a result, complete operation of the 16 bit counter on the designed chip was confirmed. |
キーワード |
(和) |
FPGA / 電力再構成 / FPGAアーキテクチャ / タイル / / / / |
(英) |
FPGA / Power reconfigurability / FPGA architecture / Tile / / / / |
文献情報 |
信学技報, vol. 109, no. 198, RECONF2009-25, pp. 37-42, 2009年9月. |
資料番号 |
RECONF2009-25 |
発行日 |
2009-09-10 (RECONF) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
RECONF2009-25 |