講演抄録/キーワード |
講演名 |
2009-03-13 18:00
ズームアップ撮影による高精細3次元ビデオ生成のためのパン・チルトカメラワーク ○稲積慶人・浮田宗伯・木戸出正継(奈良先端大) PRMU2008-260 |
抄録 |
(和) |
無形文化財のデジタルアーカイブを行うために,本研究では複数台のカメラで対象を撮影する
だけで対象の形状とテクスチャの3次元情報が得られる3次元ビデオという情報メディアを用いる.
従来の3次元ビデオでは,常に動く撮影対象の全身を全てのカメラが完全に捉えられるまで
ズームアウトし,カメラを静止させていた.
しかし,この従来手法では全てのカメラが対象の全身を完全に捉える必要性により各カメラに
対してズーム制限が生じる.その結果,撮影画像の高精細化に上限が発生してしまう
という欠点を有する.
そこで,本研究では従来よりもズームアップ撮影をすることで対象の一部分のみを捉えた
カメラを能動的にパン・チルト回転させることで対象全身の形状の正確さの低下を抑制しつつ
対象全身の高精細画像を取得する.それにより,従来よりも高品質な
3次元ビデオを作成することを目的とする.
また,本論文では(1)実環境下で動的な対象をズームアップ撮影するためのシステム構築,
(2)どのカメラが対象のどの部分を撮影するかを決定する手順であるカメラワーク決定手法
について述べる. |
(英) |
In this paper, we propose a real-time human-body shooting system with
zoom-in pan-tilt cameras. The task of the system is to observe the
whole body of a moving person as detail as possible for making
high-fidelity 3D video with high-resolution shape and texture. With a
zoom-in camera, the high-resolution image of only a part of the body
can be captured. The system must therefore control each camera
towards a body-part that can be captured well by the camera so that
the whole body is captured by all the cameras. We developed the
following camera architecture and camera assignment algorithm: (1) a
pan-tilt camera architecture in which its pan-tilt angle and capturing
timing are fully synchronised and (2) the target body-part of each
camera is determined so that 3D reconstruction errors in the whole
body are suppressed as much as possible. Experimental results with
our prototype system demonstrated that the system could capture the
whole body of a moving/dancing person and the resolution of captured
videos was much better than that captured by fixed zoom-out cameras. |
キーワード |
(和) |
3次元ビデオ / オンライン / システム構成 / 人体形状解析 / カメラワーク決定 / / / |
(英) |
3d video / online / system / shape-analysis / camera-work / / / |
文献情報 |
信学技報, vol. 108, no. 484, PRMU2008-260, pp. 141-148, 2009年3月. |
資料番号 |
PRMU2008-260 |
発行日 |
2009-03-06 (PRMU) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
PRMU2008-260 |