講演抄録/キーワード |
講演名 |
2009-03-13 13:15
単一のスリットセグメントへの領域分割によるプリント回路基板の電源系共振の高速解析 ○濱上雄大・豊田啓孝・五百旗頭健吾・古賀隆治(岡山大) EMCJ2008-118 |
抄録 |
(和) |
多層プリント回路基板の電源系共振は, グリーン関数のモード展開を適用したポート間インピーダンス解析に高速化手法を適用することで, 短時間でその特性を計算することができる. この手法では, 電源層にスリットを含む場合も, スリット間の電磁結合を表現するモデルを用いて共振特性が求められる. しかし, このスリットモデルの表現ではスリットが幅を持たないため, 複数のスリットがある場合など, スリットの幅が電源層の大きさに影響を与える場合には計算結果が正しくなくなる可能性がある. そこで本論文では, スリット間の電磁結合を表現するため, 結合マイクロストリップ線路から求めた等価回路モデルを用いて単一のスリットのみを含むスリットセグメントを構成し, これを電源系共振解析に適用することを検討した. 結果として, 従来モデルと同等かそれ以上の精度で電源系共振解析が可能であることが分かった. |
(英) |
A fast algorithm based on a full cavity-mode resonator model of rectangular power-bus structures is able to quickly obtain the power-bus resonance characteristics in multilayer printed circuit boards (PCBs). Furthermore, the approach can provide the resonance characteristics in PCBs with a slit using a slit model expressing electromagnetic coupling across the gap of the slit. However, the model does not express the slit width , which can cause the degradation in accuracy of resonance alysis. In this paper, a slit segment was studied to express the gap of the single slit coupling and analyze the power-bus resonances. The slit segment was given from an equivalent circuit based on a coupled microstrip line. As a result, it was found that the slit segment can provide the power-bus resonance characteristics as accurate as or more accurate than the conventional slit model. |
キーワード |
(和) |
多層プリント回路基板 / 電源系共振 / セグメンテーション法 / スリット / 電磁結合 / / / |
(英) |
multilayer PCBs / power-bus resonance / segmentation methed / slit / electromagnetic coupling / / / |
文献情報 |
信学技報, vol. 108, no. 482, EMCJ2008-118, pp. 25-30, 2009年3月. |
資料番号 |
EMCJ2008-118 |
発行日 |
2009-03-06 (EMCJ) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMCJ2008-118 |
|