講演抄録/キーワード |
講演名 |
2008-08-29 13:35
不要多重反射波除去信号処理回路を付加した60GHz帯NRDガイドパルスレーダによる測距実験 ○高山和也・黒木太司(呉高専) MW2008-97 エレソ技報アーカイブへのリンク:MW2008-97 |
抄録 |
(和) |
NRDガイド技術を用いてミリ波パルスレーダフロントエンドを試作し、測距実験が行われたが、レーダと測定対象物との距離が短い場合、アンテナの鋭い指向性によりアンテナと測定対象物との間で多重反射が発生し、正確な距離計算ができないという問題が生じた。そこで本論では多重反射波の問題を回避しつつ、多層面との距離をそれぞれ検知することのできる信号処理を検討し、複数ターゲットの観測される環境下において、測距実験を行った。その結果、連続サンプリングを用いることにより測定誤差を±8cm以下に抑えることができた。 |
(英) |
A pulse radar front-end using an NRD-guide technology was fabricated as level sensing at millimeter wave lengths, and range finding was performed by using it. Multi-reflection however occurred between a target and a planar antenna due to a pencil beam radiation of our-developing planar antenna, so that precise distance estimation could not be performed for short range detection. To overcome such difficulty, we developed an FPGA-based signal processor to eliminate such multi-reflection as well as to detect distances of multi layered-targets. We can decrease the measurement error to ±8cm and under by using the sequential sampling method. |
キーワード |
(和) |
レーダ / FPGA / DSP / 連続サンプリング / / / / |
(英) |
radar / FPGA / DSP / Sequential sampling / / / / |
文献情報 |
信学技報, vol. 108, no. 195, MW2008-97, pp. 103-106, 2008年8月. |
資料番号 |
MW2008-97 |
発行日 |
2008-08-21 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2008-97 エレソ技報アーカイブへのリンク:MW2008-97 |