講演抄録/キーワード |
講演名 |
2008-07-17 13:15
コモンモードアンテナモデルによるコネクタ接続されたプリント回路基板からの放射電磁波予測(その2) ~ インダクタンスの考慮によるコネクタ部モデルの改良 ~ ○若槻友里・鳥越 誠(岡山大)・渡辺哲史(岡山県工技センター)・豊田啓孝・五百旗頭健吾・古賀隆治(岡山大) EMCJ2008-32 |
抄録 |
(和) |
本報告では,コネクタを介して接続されているプリント回路基板(PCB)に対して,コネクタ部の持つインダクタンスを考慮したコモンモードアンテナモデルを提案する.コモンモードアンテナモデルは,PCBからのコモンモード放射を高速かつ少ない計算コストで計算できる.前報では,コネクタ接続PCBにおいてもコネクタのピン配置による放射量の変化を計算することができることを示した.しかし実測で見られた放射スペクトルの周波数シフトは再現できなかったので,ピーク付近の精度は十分とは言えなかった.この原因をコネクタ部の実効インダクタンス変化と考え,本報告ではこれを考慮することでモデル改良を行った.その結果,このインダクタンスを考慮した改良モデルでは放射の周波数シフトが表現でき,実測結果と比較したところピーク付近での精度は誤差2 dB程度まで改善した. |
(英) |
In this paper, we apply a connector model with an inductance to the common-mode antenna model. The common-mode antenna model is able to estimate common-mode radiation from a printed circuit board (PCB) fast and with low calculation cost. The previous report described that the model estimated radiation from PCBs with interconnections, depending on pin configurations of the connector. However, the calculation did not follow the frequency shift depending on pin configuration. The shift seems to result from the effective inductance of connector pins. Therefore, we developed the model considering the inductance. It was found that the modified common-mode antenna model with the connector inductance followed the frequency shift of radiation spectrum. As a result, the radiation spectrum obtained from the modified common-mode antenna model has good agreement with the measured spectrum within an error of 2 dB. |
キーワード |
(和) |
コモンモードアンテナモデル / コネクタ / プリント回路基板 / コモンモード放射 / / / / |
(英) |
common-mode antenna model / connector / printed circuit board / common-mode radiation / / / / |
文献情報 |
信学技報, vol. 108, no. 132, EMCJ2008-32, pp. 37-42, 2008年7月. |
資料番号 |
EMCJ2008-32 |
発行日 |
2008-07-10 (EMCJ) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMCJ2008-32 |