講演抄録/キーワード |
講演名 |
2008-05-23 14:15
膝の透視X線画像における骨輪郭の半自動抽出法 ○織田広司・林 豊彦・中村康雄・大森 豪(新潟大) MBE2008-8 |
抄録 |
(和) |
TKA術後の膝運動を解析するために,透視X線動画像と3次元人工関節モデルを組み合わせることにより,3次元モデルに基づいた技術が開発されている.しかし,TKA術前・術後における患者の膝運動の比較が必要とされているにもかかわらず,いまだにTKA術前の膝を対象とした運動解析は確立されていない.このような解析を実現するために,我々は前述の3次元モデルに基づいた手法をTKA術前の膝運動解析に応用した.しかし膝の骨輪郭は人工関節に比べて不鮮明であるという問題があるため,正確な骨輪郭抽出法の考案が求められていた.そこで我々は,手入力した初期輪郭から反復的に骨輪郭を抽出できる半自動的な方法を考案した.抽出した輪郭の妥当性を評価するために,我々は4つの異なる膝の透視X線画像を用いて,いくつかの実験を行った.すべての実験結果より,提案した方法は,膝の骨輪郭を高い再現性で,かつ正確に抽出できる可能性をもっていることが示唆された. |
(英) |
In order to analyze knee motion after total knee arthroplasty (TKA), a 3-D model-based technique was developed by combining fluoroscopic image sequence of knee motion and 3-D model of prosthetic components. Knee motion analysis before TKA, however, has yet to be established, even though it is necessary to compare patient’s knee motion before and after TKA. To realize such analysis, we applied the 3-D model-based technique into knee motion analysis before TKA. But the problem is that bone contour of the knee is usually blurred, compared to that of prosthetic components, necessitating us to develop an accurate bone-contour extraction technique. Then, we developed a semiautomatic method capable of extracting bone contour iteratively from its initial one digitized manually. To evaluate its validity, we carried out several experiments, employing fluoroscopic images of 4 different knees. All empirical results suggested that our method would have a potential to extract accurate bone contour of the knee with high reproducibility. |
キーワード |
(和) |
透視X線画像 / 骨輪郭 / 膝運動解析 / 人工膝関節置換術 / / / / |
(英) |
fluoroscopic image / born contour extraction / knee motion analysis / total knee arthroplasty / / / / |
文献情報 |
信学技報, vol. 108, no. 52, MBE2008-8, pp. 33-38, 2008年5月. |
資料番号 |
MBE2008-8 |
発行日 |
2008-05-16 (MBE) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MBE2008-8 |